Electric Power Steering Diagnostics

Electric Power Steering Diagnostics

Load management for steering systems.

In the late 1990s, engineers and OEMs predicted a future where 42-volt electrical architecture would be a standard feature on all new vehicles. This high-voltage system was a solution for the power required for loads such as electric power steering. It got as far as an SAE standard so OEMs and suppliers could implement these systems. What happened? The simple answer is that engineers improved how 12-volt power was managed in the vehicle.

During this period, many engineers were dealing with another trend called multiplexing. Twenty-five years ago, vehicles had a lot of systems that operated independently of other systems. For example, you might have seen an engine control module talking to a transmission control module or an ABS module over a Control Area Network (CAN). But, it was rare to have a body control, instrument cluster or air ride modules talking to each other. Multiplexing was seen as a way to harmonize operations. Technicians know multiplexing as the many networks and gateways found on late-model vehicles. It is what made electric power steering possible with 12-volt systems.

The 42-volt debate did get the prediction right about increasing electrical loads. What it got wrong was the level of connectivity and speed of these networks. Engineers knew electric power steering systems could draw more than 60 amps during peak levels of assist. Managing these loads on the electrical system could be difficult. If the electric power steering system couldn’t talk to the engine control module, engine speed and power could fluctuate when assist was needed.

You may have noticed that with many domestic and import vehicles starting to make the shift to electric power steering, they introduced modules that managed the power distribution for a vehicle’s electrical system at the same time. These power modules are networked and can manage the loads caused by sudden steering inputs and activation of the valves in the ABS module that might require 80 amps of power.

Diagnosing electric power steering systems requires an understanding of voltage, current and loads. Also, a technician must understand how the modules and sensors work together to determine the level of assist.

THE MOTOR

Most electric power steering systems use an electric motor. Some motors use a brushless design and have an operating voltage range of 9 to 16 volts. 

The motor uses a rotational sensor that determines its position. On some systems, if the module is replaced or the toe has been changed, the end stops of the steering system must be learned, so the motor does not push the rack past the maximum steering angle. This might be an additional step on top of calibrating the steering angle sensor. The motor can be connected to the steering rack or column. Today, more vehicles are using motors that are mounted to the base of the steering gear or on the opposite end of the rack.

THE MODULE

An electric power steering module is more than just a circuit board and connectors in an aluminum box. The module contains the drivers, signal generators, and MOSFET switches that power and control the electric motor. The module also contains a current monitor circuit that measures the amps the motor is using. The current monitor and other inputs determine the temperature of the motor using an algorithm that even factors in the ambient temperatures.

If the system detects a condition that could cause the motor to overheat, the module will reduce the amount of current going to the motor. The system might go into a fail-safe mode, generate a DTC and alert the driver with a warning light or message.

SENSOR INPUTS

Measuring the steering wheel position angle and rate of turn provide critical information for electric power steering systems. The scan tool will typically display this information in degrees. The steering angle sensor (SAS) is typically a part of a sensor cluster in the steering column. The sensor cluster will always have more than one steering position sensor. Some sensor clusters have three sensors to confirm the data. Some SAS clusters and sensor modules are connected to a CAN bus. The SAS module or cluster can be connected directly to the ABS/ESC module on a CAN bus, or it can be part of the overall CAN in a loop that connects various modules in the vehicle.

The steering torque sensor measures the steering force applied by the driver and enables sensitive control of the electric steering support. It serves the same function as a spool valve in a hydraulic power steering system.

THE NETWORK

The electric power steering system is typically part of the high-speed CAN bus on the vehicle. On this network is the ECM for the engine and ABS/stability control system. These modules share information for vehicle speed, steering angle and engine operation. Other information, like ambient temperature, is shared through gateway modules like the instrument cluster.

The shared information can be used to solve mechanical problems like torque steer experienced by front-wheel-drive vehicles. The ECM might receive the input from the throttle pedal, indicating the driver wants wide-open throttle while the vehicle is at a low speed. The information could be used by the power steering module to add specific levels of torque to counteract torque steer. The ABS module can also apply the brakes to steer the vehicle.

SOFTWARE

The electric power steering system has sophisticated software that can regulate not only the amount of assist, but also how the steering feels to the driver. The software also regulates the temperature of the motor. OEMs will often release updates for the power steering module. These updates can help to resolve intermittent problems and codes that could cause the light to come on and make the system enter into a fail-safe mode.

RETURNING TO CENTER

Electric power steering can help return the steering to the center after completing a turn. Information from the steering position sensor prevents the system from “overshooting” the center position. This feature is critical on today’s vehicles with large-diameter rims. The return function allows for less positive caster to increase vehicle stability and improve steering feel.

DAMPENING BUMPS 

Electric power steering can help to dampen shocks in the steering wheel due to irregularities in the road. It uses speed and steering wheel position information to determine the amount of dampening. Sometimes, the steering would enter this mode while the vehicle was parked with the engine on, and the driver might notice small movements in the wheel.

PULL COMPENSATION

A small pull caused by the tires, road crown and loads can be eliminated by the electric power steering system. The motor can help to push against the pull. Some systems will learn how a vehicle is pulling. Eventually, the system will automatically compensate. You can clear this learned compensation with a scan tool. 

AUTONOMOUS STEERING

With more accurate data and faster modules, the electric motor on the rack is doing a lot more than just assisting the driver. With just a few more sensors and new software, the vehicle can become self-steering.

Can’t parallel park? Mount some proximity sensors in the bumpers that can be used for a parking assist system that can parallel-park a vehicle. All the driver has to do is operate the gas and brake.

Add front and rear cameras and proximity sensors to the sideview mirrors, and you have a lane departure system that can tell when the vehicle is drifting out of its lane. Mild systems can shake the wheel like they are hitting an imaginary rumble strip; more aggressive systems can take action and steer the vehicle back into the lane.

DIAGNOSTICS

Electric power steering systems can’t typically be fixed by throwing parts at the problem. The rack and module can be very expensive to replace. Steering angle and torque sensors are difficult to swap due to their position on the steering column.

The best approach to diagnose these systems is to look at the inputs, codes and the network through a scan tool even before a physical inspection of the components. You need to look at the data from the sensors to make sure they are not giving erroneous information. Also, look at the other modules on the CAN bus to see if they are communicating. Missing pieces of data like vehicle speed or yaw can cause the system to go into a fail-safe mode.

NEXT-GENERATION POWER STEERING

Ford, Audi, Mercedes-Benz, Honda and GM are introducing steering systems with variable ratios on some platforms. Some automakers are also calling this adaptive steering.

Variable-ratio steering changes the relationship between the driver’s actions at the steering wheel and how much the front wheels turn. With variable ratio steering, the ratio continually changes with vehicle speed, optimizing the steering response in all conditions.

At lower speeds, such as when pulling into a parking space or maneuvering in tight areas, fewer turns of the steering wheel are required. Adaptive steering makes the vehicle more agile and easier to turn as it dials more steering into the road wheel.

At highway speeds, the system optimizes steering response, letting the vehicle react more smoothly to each steering input. Systems from Ford and Mercedes-Benz use a precision-controlled actuator placed inside the steering wheel and require making no changes to a vehicle’s traditional steering system.

The actuator is an electric motor and gearing system that can essentially add to or subtract from a driver’s steering inputs. The result is a better driving experience at all speeds, regardless of vehicle size or class.

You May Also Like

Duramax Diesel Turbo Codes P0290 and P2463

No matter the symptoms or damaged parts, the root cause of the failure must be diagnosed and resolved.

Duramax_Turbo_FI

Some turbocharger failures on some GM Duramax 6.6 diesel engines from 2011-2017 are quick and catastrophic. It could start with smoke from the tailpipe or even a catalytic converter clogged with oil and debris. You may notice the engine is down on power. These are easy to diagnose.

Some turbocharger failures for these engines are less dramatic and might not require a replacement unit. Instead, they start with a code and a check engine light. These are typically caught by the engine management system when it senses the turbocharger is no longer producing the expected level of boost for a given engine speed or load.

Vacuum Brake Booster Diagnostics

Vacuum brake boosters will probably be with us for a long time.

Toyota Steering Column “POP” Noise

Follow this repair procedure if the bulletin applies.

ADAS Calibration – Myths and Operation

Here’s what really goes on during an ADAS calibration.

Key Programming

You might think that key programming is a job for a locksmith or specialist, but the market is changing.

Other Posts
Tesla Model 3 TPMS Service

When replacing the tires on the Tesla, you will have to service the TPMS sensors.

Ball Joints – How To Avoid Memory Steer

Follow all instructions to avoid issues caused by incorrect installation. This video is sponsored by Auto Value and Bumper to Bumper.

Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

Constant-Velocity Axle Options

Whether new or remanufactured, complete CV axle assemblies can throw you a curveball from time to time.