Tech Tip: Dodge Has A P2767 Code With Transmission In Limp In Mode

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Drivetrain

Tech Tip: Dodge Has A P2767 Code With Transmission In Limp In Mode

If you encounter a Dodge with a P2767 trouble code set, check the wiring between the transmission and the transmission control module. Make sure the #2 signal wire is not open, shorted to ground, or shorted to any other circuit. If the wiring checks OK, raise all four wheels off the ground, start the vehicle and place the shifter in drive. While lab scope testing the #2 signal wire, obtain second gear. When the transmission is in second gear, there should be a 5-volt square wave pattern being produced by the #2 sensor. If not, replace the sensor.

Brake and Front End Staff
By Brake and Front End Staff
Published:

Applies To:
2006 300 3.5L
2006-’07 300 5.7L
2006-’07 Charger 3.5L
2006-’08 Charger 5.7L
2009 Grand Cherokee 3.7L
2006 Magnum 5.7L

Related Articles

Customer Concern:
P2767 trouble code (Torque Conv Clutch Press Ctrl Solenoid Ctrl Circ Range/Perf) is setting. Transmission is in limp in mode.

Potential Causes:
Lead Frame or Transmission Wiring

Tests/Procedures:
1. Check the wiring between the transmission and the transmission control module. Make sure the #2 signal wire is not open, shorted to ground, or shorted to any other circuit.

2. If the wiring checks OK, raise all four wheels off the ground, start the vehicle and place the shifter in drive. While lab scope testing the #2 signal wire, obtain second gear. When the transmission is in second gear, there should be a 5-volt square wave pattern being produced by the #2 sensor. If not, replace the sensor.

Tech Tips:
The speed sensors are sold as a complete assembly, which may be called the “lead frame” or ­possibly the “electrohydraulic control unit.”

Courtesy of Identifix.

You May Also Like

News

AACF Launches 65th Anniversary Fundraising Initiative

The campaign aims to raise $65,000 through 1,000 donations of $65 each.

Brake and Front End Staff
By Brake and Front End Staff
Published:

The Automotive Aftermarket Charitable Foundation (AACF) announced the launch of its 65th-anniversary fundraising initiative. Running through July 1, 2024, the campaign aims to raise $65,000 through 1,000 donations of $65 each. This impactful effort highlights the industry's commitment to taking care of its own, the AACF said.  From sudden illness and death to natural disasters, the foundation has provided assistance to industry professionals and their families during their darkest hours. As AACF celebrates its 65th year of service, it remains steadfast in its mission to provide financial support and resources to those in the automotive aftermarket industry in need, the organization said. In honor of this milestone, AACF is calling upon automotive aftermarket industry professionals, as well as compassionate individuals eager to lend a helping hand, to join forces in raising $65,000. By making a symbolic donation of $65, supporters can contribute to a fund that offer vital assistance during a time of greatest need. "Over the past 65 years, AACF has remained unwavering in its commitment to supporting members of the automotive aftermarket community during their most challenging moments," said Joel Ayres, AACF executive director. "As we embark on this historic fundraising initiative, we are inspired by the generosity and compassion of our supporters. Together, we can make a profound difference in the lives of those facing adversity, demonstrating the industry's unwavering dedication to taking care of its own."

Read Full Article

More Drivetrain Posts
Constant-Velocity Axle Options

Whether new or remanufactured, complete CV axle assemblies can throw you a curveball from time to time.

By Brake and Front End Staff
10 Timing Belt Tips

Here are the some key installation and service tips to make your next timing belt job just a little easier.

By Andrew Markel
CVT Transmissions

The point here is not to fear a customer complaint about a CVT transmission. 

By Andrew Markel
Mercedes 4MATIC Diagnostics

The Mercedes-Benz 4MATIC all-wheel drive (AWD) systems have been around for a while now.

By Brian Sexton

Other Posts

Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

By Andrew Markel
Avoiding Brake Noise Comebacks

Brake systems are complex and require an understanding of the root cause of generating the noise.

By Andrew Markel
Topology And Your Scan Tool

Topology influences how you access the modules with your scan tool.

By Andrew Markel
Car properties detailed in "see proof" car image.
Standard Motor Products Announces 123 New Numbers

The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

By Brake and Front End Staff