Andrew Markel, Author at Brake & Front End - Page 104 of 117
Alignment & Suspension Specs: 2005-’10 Ford Mustang (Plus Shelby)

In 2005, Ford introduced a new Mustang with an all-new platform and clean-sheet design. While the formula of a live axle rear and MacPherson strut front end were the same from the previous model, Ford refined the design. These changes make for a vehicle that is easier to align and diagnose compared to the previous generation.

Tech Feature: GM Tire Pressure Monitoring Systems (TPMS)

GM TPMS systems on Buick, Pontiac, Chevy (Chevrolet), GMC Cadillac and Hummer models are some of the easiest to service if you have the right tools and knowledge. Starting in 2007, most vehicles use a Schrader- or VDO-manufactured system that shares the same relearn procedures and behaviors. There are exceptions, like the Pontiac Vibe.

FMSI: Serving Shops and Brake Manufacturers for More than 60 Years

If you purchase almost any set of brake pads or shoes, the last three or four digits of the parts number match for most of your brand choices. This is not an accident or OEM conspiracy. This is the product of more than 60 years of cooperation of brake friction manufacturers. This collaboration is the Friction Materials Standards Institute (FMSI) and the FMS number system. The fruits of this endeavor go beyond part number; it has given shops new brake applications sooner and at a lower cost.

Tire Tech Tip: Always Install Two

When it’s time to replace only two tires on passenger vehicles, logic should take a back seat to physics – or in this case, a rear axle.
Typically, vehicles are shod with four similarly designed and constructed tires of the same size on the front and back. The tread depth of each starts out equal, and inflation pressure matches specifications posted on a vehicle’s information placard label and owner’s manual.

Alignment & Suspension Specs: 2006-10 Dodge Charger Police Package

The Dodge Charger Police Package entered service in 2006. Compared to the civilian model, the police variant’s suspension is the same, except for some changes in the the sway bars, shock valving and changes to the ABS and stability control software. In 2011, Chrysler is introducing a Pursuit version with heavy-duty performance front and rear suspensions with load-leveling/NIVOMAT shocks.

Tech Feature: Brake Job on Ford CVPI

The Ford Crown Vic Police Interceptor, or CVPI, has been around since 1992. The current crop of CVPIs do not differ much mechanically from their predecessors, but on the undercar electronics, the vehicle has advanced dramatically in the past 10 years.

Interview with Scot A. Holloway, General Manager, Bartec USA, LLC

Certainly by now you have heard about Tire Pressure Monitoring Systems (TPMS). This increasingly hot topic is very controversial yet compelling. Tire Pressure Monitoring Systems are and have been a required feature on U.S. Passenger vehicles since 2008. Introducing this technology to the way we maintain our vehicles has improved safety and vehicle performance, increased fuel efficiency and tire life. It also has forever changed the way autos and tires are serviced.

Right Part, Right Time: Could an Inventory of Parts Be in Your Future?

When I was a small child, I spent weekends at my grandfather’s Chevron station in Denver. I remember the row of brightly colored cabinets and special displays he had for parts. There were cabinets for light bulbs, brake pads, bearings and many more parts that I have forgotten. All were the colors of the brands they represented.

High Performance Brakes: Carbon Ceramic Rotors

Would you spend $8,000 to $12,000 for an optional brake package on your next vehicle? What if I told you they would never fade, improve gas mileage and maybe need a change every 180,000 miles? Ceramic composite or carbon ceramic brake rotors and pads offer these advantages and more.

Brake Job: 2007 GM Full-Sized 1500 Pick-Up and SUV

The GMT 900 debuted in 2007 as the replacement for the GMT 800. The first GMT 900 vehicle was the Chevrolet Tahoe, which arrived at dealers in January 2006. The GMC Yukon (regular and Denali) and Cadillac Escalade soon followed. Chevrolet Avalanches and Suburbans, GMC Yukon XLs, and Cadillac Escalade ESV and EXT were next to hit the roads.

When A Recall Is Just A Recall: It a leaking seal, not a smoking gun …

You probably noticed that I kept quiet during the entire Toyota unintended acceleration fiasco while the rest of the media ran with the story giving it new levels mass hysteria. The media was even gift-wrapped an LAPD-style car chase as one driver faked a stuck gas pedal in his Prius on the Pacific Coast Highway.

Latest Toyota Recall Due to Replacement Brake Fluid and OE Seals

Toyota Motor Sales announced it will conduct a voluntary Safety Recall for a brake problem that occurs once the vehicle has been serviced with non-factory fill/genuine brake fluid. Drivers may experience a small amount of the brake fluid leaking from the brake master cylinder, resulting in illumination of the brake warning lamp.