The inline spark tester comes with a coil-on-plug wire to visually check spark energy on various ignition systems.
There is more computing power in the average new vehicle than was on board the Apollo spacecraft that put men on the moon. That power comes from control modules, sensors, and other components that are linked together—and those links require connectors that can withstand the vibration, moisture, and other hazards without failure. GM’s Weather Pak
Air pressure is added to the water flow, creating agitation that flushes out even the most stubborn clogs.
This hanger from Lisle can be attached to most toolboxes, benches or walls to store plastic or metal creepers.
Adapt-a-Cap eliminates the need for external pumps, hoses or funnels to transfer fluids, and helps prevent spills and messes.
Designed for the GM EcoTec3 5.3L and 6.2L Motors.
The cross-cut tip design grips most hose clamps from multiple angles. A ratcheting lock mechanism holds the clamp in an open position for hands-free use.
Milled slots guide the tool onto the lock rod retainer and keep it in place as the rod is removed.
The kit’s cam adjusting holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving OEM cams.
The Combination Disc Brake Kit (29350) from Lisle Corp. is designed to work on single piston disc brakes that require the piston to be rotated back into the caliper as well as pistons that are pushed. Included in the kit are two double-sided two pin adapters along with a pinless pushing adapter.