Charging for Diagnostic Time

Charging for Diagnostic Time

Diagnostic work is more sophisticated and your techs’ time is worth charging for. This video is sponsored by Auto Value and Bumper to Bumper.


How many times has this happened to you: your customer drives up in a car with the check engine light illuminated. Naturally, as an experienced service advisor you ask about what the car is experiencing. The driver says, “I know it just needs an oxygen sensor – I have a buddy with a code scanner and that’s what comes up on the internet.” 

Simple right? You can order the replacement part online, send it back to the tech who’s just standing there waiting to go and bing, bang, boom the job is complete and everyone is happy. 


Of course, you know it’s not that easy and, frankly, most of your customers understand it too. Today’s vehicles are more complicated than ever before and things are only getting more complex.  

Should you be expected to know exactly what’s wrong with a vehicle just by listening to a driver’s vague description? That would be like expecting your doctor to identify what’s ailing you when you say “It hurts here.” 

While scan tools can help in quickly reading the diagnostic trouble codes, they won’t necessarily pinpoint the exact cause of the problem. As with your doctor – think of an MRI, xray, cat scan or simple blood test – a trained expert is needed to determine exactly what the proper treatment needs to be.  

Often advanced tools, software subscriptions and a technician with the level of skills to successfully put all these elements together are required to arrive at the solution to the customer concern. In many cases, a veteran tech with 10+ years of service and a commitment to ongoing training is the person performing the work. 

So, with all of the tools involved, the expertise required to use them and the investigative skills necessary to understand what the results mean, why does it sometimes feel that you have to apologize for charging for diagnostic time? Frankly, you shouldn’t. 

Professionals in every walk of life, from pool heater repair guys to insect exterminators typically charge a service charge just to show up. It comes down to communicating with your customer. 

Some shops build diagnostic time into the overall job ticket; other spell out the time as a separate line item. Some experts say that an hour is adequate for most experienced techs on the majority of diagnostics, though sometimes it just takes longer. You may find yourself calling the customer to get an additional hour authorized, especially if the tech has reached a point where engine tear down is required, such as with a misfire or cylinder balance issue and you’re checking the valve train, or with a potential timing issue and you’re checking timing chains. Sometimes it’s the case with electrical diagnosis that requires disassembly to reach buried harnesses and connectors. 

Your customers don’t work at their job and not receive proper compensation, why should you and your shop? Diagnostic work is more sophisticated and your techs’ time is worth charging for! Don’t give it away! 

You May Also Like

Understanding Stretch Shrink Belts

Andrew Markel uses an old school toy to describe how these belts work. This video is sponsored by Auto Value and Bumper to Bumper.

For some of our older viewers, you may remember a toy called Shrinky Dinks. This was a toy where you would color in on a plastic sheet, and then you would cut it out and put it in the oven and it would shrink. So something that was four inches went down to maybe two inches or the size of a key chain. This same technology is involved in stretch belts. If you see a belt that says stretch or stretchy on the side, or it's indicated on the product sleeve that it is a stretch belt. Well, this belt, it typically doesn't have a tensioner with no tension. How does it set that final tension? Well, it uses that same properties as shrink heatings. When the belt is run and gotten up to temperature, it actually conforms to the pulley and grooves to give the proper tension. So what does that mean to you, the technician?

Mass Air Flow Sensor Cleaners

What can you do both for maintenance and for service and diagnostics to confirm a mass airflow sensors functioning properly? Andrew Markel shares the secret in this video sponsored by Auto Value and Bumper to Bumper.

ADAS Calibrations: Limited Space

Babcox Media’s Joe Keene provides a quick overview of many examples that demonstrate ADAS work should be in play for almost everyone.

Vacuum Pumps and Parking Brake Actuators

As the car parc evolves, so do service opportunities. This video is sponsored by Standard.

Gasoline Direct Injection Technology

Gasoline Direct Injection technology has been a key part of improving fuel economy and reducing emissions since the early 2000s. This video is sponsored by Standard.

Other Posts

Brake Pad Edge Codes – What Can They Tell You?

The edge code is a language written by engineers, federal entities and industry associations.

Ride Control For Electric Vehicles

Replacement units are available from sources other than the dealer.

Mercedes 4MATIC Diagnostics

The Mercedes-Benz 4MATIC all-wheel drive (AWD) systems have been around for a while now.

Timeless Quotes Teach & Inspire

Here are six quotes that every shop owner should live by.