Guess the Brake: Win free tools!

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Wheel End

Guess the Brake: Win free tools!

If you can identify year, make and model for the rear brakes pictured below you can win a set of quick disconnect tools for transmission, fuel and AC lines. This one is easy.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Brake & Front End magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers. He can be reached at [email protected].
Published:

Please put your answer in the comment box below. The year of the vehicle does not have to be dead on, but within the correct range for the platform. US residents only. Employees of Babcox Publications are not allowed to enter. 

Related Articles

 

   

 

The Gates Quick Disconnect Tool Set includes six tools including the rare 7/8" tool that is need for some HVAC lines. These tools are made of anodized aluminum and are color coded.These are essential tools if you work on transimmission, fuel and other fluid lines. 

The winner will be contacted via email for their details.

Good Luck!

 

WE HAVE WINNER!!! The car was a1998!

 

Here is a picture of the full car!

 

 

You May Also Like

EV Bizz

How Regenerative Brakes Operate

Regenerative braking is a hybrid’s first choice for braking.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Brake & Front End magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers. He can be reached at [email protected].
Published:

A hybrid vehicle is a different animal than many of us are used to seeing. After all, if the engine of a typical vehicle stalled out at a traffic light, the driver of that vehicle would know something was wrong with it. If that same vehicle still drove with the engine off, then that would mean they were probably going down hill. But, in the hybrid world, that is all normal. Systems around the vehicle are impacted by two key features:

Read Full Article

More Wheel End Posts
Tesla Wheel Bearing Replacement

The process of replacing the hub unit on a Tesla is the same as many cars and light trucks.

By Andrew Markel
Brake Pad Edge Codes – What Can They Tell You?

The edge code is a language written by engineers, federal entities and industry associations.

By Andrew Markel
Brake Problems

Reducing brake drag on late-model vehicles is not accomplished by a single component; it takes a system.

By Andrew Markel
The Real Cost of Installing Cheap Brake Pads

The brake repair market is starting to become dominated by a “good enough” mentality.

By Andrew Markel

Other Posts

Benefits of Using Brake Parts Designed to Work Together

When replacing brake system components, it might seem like using compatible parts from any manufacturer – regardless of brand – should get the job done. However, for the safest brake job with the best performance, it’s always best to use parts from the same manufacturer, like ADVICS, where our brake pads, brake rotors, hydraulics, calipers

By Advics
Brake Boosters and Start/Stop Vehicles

For a vacuum brake booster to work, it needs a source of vacuum.

By Andrew Markel
Wheel Speed Sensor and Hub Unit Diagnostics

All wheel speed sensor codes are just the starting points of a diagnosis and not a reason to order a part.

By Andrew Markel
Better Brake Law Update

Learn the latest about the salmon-inspired law.

By Andrew Markel