This customer chose an interesting solution when the air ride suspension on his SUV started to leak. The rubber block looks like a wheel chock wired to the trailing arm of the suspension. I am sure the ride was not the most comfortable.
Replacing rear wheel bearings on a live axle rear suspension requires a few extra steps when compared to a unitized bearing.
Replacing wheel bearings on a vehicle with a live rear axle may not be one of the most regular jobs you do, but it can be one of the most profitable. While the basics have not changed in more than 60 years, new seal materials and differential designs have added new wrinkles.
If one of these sensors is replaced, it must be calibrated after it is installed.
Replacement units are available from sources other than the dealer.
The “Edge Code” can tell you information about a brake pad’s friction material.
Knowing why the adjustment is required is critical to performing the total alignment.
The question customers fail to ask is, what is “best” for their vehicle?
The key to understanding the logic of air ride systems is using service information.
It is important for the ABS/ESC module to receive two signals to verify the steering wheel’s position.
The source of the complaint can be the angles, electronics or tires.
