TECH TIP: Mini: Erroneous “Service Due” Message For Brake Pad Thickness

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Wheel End

TECH TIP: Mini: Erroneous “Service Due” Message For Brake Pad Thickness

The mathematical calculation made by the Condition Based Services Module (CBS) do not agree with the actual brake wear. The CBS uses inputs like vehicle speed, pedal pressure and rotor temperature to determine if the pads require replacement.

Brake and Front End Staff
By Brake and Front End Staff
Published:
Models: Some 2011-2012 Mini
 
Problem: Brake pad thickness warning message is displayed even if the pads are above specifications. 
 
Cause: The mathematical calculation made  by the Condition Based Services Module (CBS)  do not agree with the actual brake wear. The CBS uses inputs like vehicle speed, pedal pressure and rotor temperature to determine if the pads require replacement. 
 
Correction: Re-flash the CBS module with new software. 
This tech tip from The Timken Company is ­designed to help you install and maintain Timken bearings, seals and components to maximize the life and performance of those bearings and the systems in which they operate. 
Related Articles

You May Also Like

EV Bizz

How Regenerative Brakes Operate

Regenerative braking is a hybrid’s first choice for braking.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Brake & Front End magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers. He can be reached at [email protected].
Published:

A hybrid vehicle is a different animal than many of us are used to seeing. After all, if the engine of a typical vehicle stalled out at a traffic light, the driver of that vehicle would know something was wrong with it. If that same vehicle still drove with the engine off, then that would mean they were probably going down hill. But, in the hybrid world, that is all normal. Systems around the vehicle are impacted by two key features:

Read Full Article

More Wheel End Posts
Tesla Wheel Bearing Replacement

The process of replacing the hub unit on a Tesla is the same as many cars and light trucks.

By Andrew Markel
Brake Pad Edge Codes – What Can They Tell You?

The edge code is a language written by engineers, federal entities and industry associations.

By Andrew Markel
Brake Problems

Reducing brake drag on late-model vehicles is not accomplished by a single component; it takes a system.

By Andrew Markel
The Real Cost of Installing Cheap Brake Pads

The brake repair market is starting to become dominated by a “good enough” mentality.

By Andrew Markel

Other Posts

Brake Boosters and Start/Stop Vehicles

For a vacuum brake booster to work, it needs a source of vacuum.

By Andrew Markel
Wheel Speed Sensor and Hub Unit Diagnostics

All wheel speed sensor codes are just the starting points of a diagnosis and not a reason to order a part.

By Andrew Markel
Better Brake Law Update

Learn the latest about the salmon-inspired law.

By Andrew Markel
Identifying Brake Issues With Brake Dust

Brake dust can indicate what could be wrong. This video is sponsored by Auto Value and Bumper to Bumper.

By Andrew Markel