Ford Focus: Diagnosing Squeak/Creak While Driving Over Bumps

Ford Focus: Diagnosing Squeak/Creak While Driving Over Bumps

Some 2008-2010 Focus vehicles may exhibit a squeak/creak noise from the underbody when driving on rough roads. The noise may be caused by contact between the park brake cables and the routing eyelets.

MODELS:
2008-2010 Focus

ISSUE:
Some 2008-2010 Focus vehicles may exhibit a squeak/creak noise from the underbody when driving on rough roads. The noise may be caused by contact between the park brake cables and the routing eyelets.

ACTION:

If the noise is isolated to the park brake cable, install the sleeves over each of the existing park brake cables and inside the routing eyelets. Secure the sleeves with locally obtained tie straps.

 

You May Also Like

How Regenerative Brakes Operate

Regenerative braking is a hybrid’s first choice for braking.

A hybrid vehicle is a different animal than many of us are used to seeing. After all, if the engine of a typical vehicle stalled out at a traffic light, the driver of that vehicle would know something was wrong with it. If that same vehicle still drove with the engine off, then that would mean they were probably going down hill. But, in the hybrid world, that is all normal. Systems around the vehicle are impacted by two key features:

Tesla Wheel Bearing Replacement

The process of replacing the hub unit on a Tesla is the same as many cars and light trucks.

Brake Pad Edge Codes – What Can They Tell You?

The edge code is a language written by engineers, federal entities and industry associations.

Brake Problems

Reducing brake drag on late-model vehicles is not accomplished by a single component; it takes a system.

The Real Cost of Installing Cheap Brake Pads

The brake repair market is starting to become dominated by a “good enough” mentality.

Other Posts

Benefits of Using Brake Parts Designed to Work Together

When replacing brake system components, it might seem like using compatible parts from any manufacturer – regardless of brand – should get the job done. However, for the safest brake job with the best performance, it’s always best to use parts from the same manufacturer, like ADVICS, where our brake pads, brake rotors, hydraulics, calipers

Brake Boosters and Start/Stop Vehicles

For a vacuum brake booster to work, it needs a source of vacuum.

Wheel Speed Sensor and Hub Unit Diagnostics

All wheel speed sensor codes are just the starting points of a diagnosis and not a reason to order a part.

Better Brake Law Update

Learn the latest about the salmon-inspired law.