Steering Angle Sensor Service
Ninety percent of the time when a steering angle sensor code is active, it means the sensor needs to be calibrated.
Electric Power Steering Sensors
Let’s take a closer look at the sensors which make up EPS systems, and how they operate.
Steering Angle Sensor Troubleshooting
If the calibration process can’t be completed, it will set a code for the steering angle sensor.
John Gardner And Babcox Media Partner For Video Series
John Gardner produced a series of videos with Babcox Media to give a detailed look into what goes into complex car systems.
Mobile ADAS Calibration
I am convinced that this is the only way for the industry to keep moving forward.
VIDEO: Resetting The Steering Angle Sensor After An Alignment
Hunter trainer Dave Fox and Andrew Markel discuss the steps required to reset or calibrate the steering angle sensor.
Camaro Alignment 2010-2015
The front suspension uses struts and dual lower control arms.
Top Alignment Tips
When doing your pre-alignment inspection, always check and set tire inflation pressures.
Understanding Steering Sensors
Modern vehicles need to know the difference between what the driver “wants” and what the vehicle is actually “doing.” The vehicle uses sensors that measure steering angle, brake pedal position and throttle angle to know where the driver wants the vehicle to go.
Alignment Specs: 2008-2017 Chevrolet Traverse, Saturn Outlook, GMC Acadia And Buick Enclave
The 2008-2017 Chevrolet Traverse, Saturn Outlook, GMC Acadia and Buick Enclave are all based on the Lambda platform and represent a large portion of GM vehicles. These vehicles can be front- or all-wheel drive.
VIDEO: Steering Angle Sensor Recalibration
ASE certified technician Andrew Markel discusses the importance of recalibrating the steering angle sensor after disconnecting the battery in a vehicle. Sponsored by Standard.
Electronic Power Steering: Better Than Hydraulic?
Diagnosing electric power steering systems requires an understanding of voltage, current and loads. Also, a technician must understand how the modules and sensors work together to determine the level of assist.
