You searched for Tech Feature Feed - Page 6 of 38 - Brake & Front End
Tech Feature: Toyota V8 Timing Belt Service

When I first started researching this article, I called and stopped by several shops that do work on Toyota vehicles. I asked if any of them had any V8 models coming in for timing belts so I could get some pictures of the process. Either a blank stare, or a question like: “What Toyota V8?” was the general response. The idea that there was a Toyota V8 needing a timing belt replacement seems to be generally unknown in the aftermarket.

Tech Feature: Diagnosing Push Button Keyless Start Systems

Push button keyless start systems began appearing on several import cars about six years ago, and are now being offered on more and more new vehicles, both import and domestic. Motorists say they like the push button keyless start systems because they are convenient to use. There’s no ignition key or switch to fumble with, and you don’t have to do anything other than have the smart fob in your pocket or purse when you get in the car.

Tech Feature: Solving Brake Pedal Pulsation Complaints

Reoccurring pulsation complaints are perhaps the second most common reason a customer returns after having brake service. The brakes operate normally for the first 3,000 to 6,000 miles, but then the customer notices a high-speed pulsation when getting off the exit ramp on his way to work one morning. The customer returns to the shop with the pulsation complaint and leaves with usually one of two “fixes” – the rotors being machined or replaced. The usual explanation given the customer is that the rotors “warped.”

Tech Feature: Nissan Undercar Noise and Vibration Repairs

When it comes to Nissan undercar work, Import Specialist Bob Dowie discusses the first challenge you face and that is selling the work. While he uses the word “selling,” what you are actually doing is making the customer aware of issues that need to be addressed to maintain the reliability and, more importantly, the safety of their vehicle.

Tech Feature: Why Aftermarket Belts are Lasting Longer

Serpentine belts made of EPDM may last up to 100,000 miles or more before they have to be replaced. But that doesn’t mean they will last forever. A serpentine belt that’s aging or slipping may develop a hard glazed surface that makes the belt noisy. Aerosol belt treatments may quiet the noise for a while, but sooner or later you’ll have to replace your customer’s belt.

Tech Spec: Nailing Down the Misunderstood Buick Nailhead Engine

Like the Small Block Chevy, the Rocket 88 Olds, the Ford Flathead and the Chrysler Hemi, the Buick Nailhead engine is one of those that has the immortal smell of history all over it. Yet, unlike its more familiar brothers, cousins and even competitors, the Nailhead has an aura of mystery about it as well.

Brake Tech Feature: Buick Lucerne Service

The 2006-current Buick Lucerne is the largest sedan that General Motors offers. It is built on the same line as the Cadillac DTS at the Hamtramck, MI, GM plant. The two vehicles share many brake components and the same Regular Production Option (RPO) codes for the brake system.

Ford Reflash Tech Tip: PC Settings

So, you’ve just finished up a Ford, and you’re about to try and start it up. However, it needs programmed. You’ve decided to use a J2534 tool, but there are certain things you’ll need to consider before purchasing that subscription at www.motorcraftservice.com.

Tech Tip: What Really Wears Out Inside Shocks and Struts

When shocks and struts wear out there are almost no visual clues. When a unit is leaking, it is a sign of failure and not wear. Next to performing an autopsy or throwing the unit on a dynamometer, there is no conclusive way to determine if the internal components are worn to a point where it could compromise vehicle stability. Even the “knee on the bumper” test can give false results due to how some units handle low frequency movements.

Raybestos Racing Brakes Become Roush Fenway Marketing and Technical Partner

Roush Fenway Racing announced a multi-year marketing partnership with Raybestos that will see its four NASCAR Sprint Cup Series teams run Raybestos brake packages, beginning with short track and road course events in 2011. While Raybestos has provided Roush Fenway with brakes for many of its 291 NASCAR wins and five NASCAR championships, 2011 marks the beginning of a larger technical and marketing partnership.