You searched for Flywheel - Page 6 of 15 - Brake & Front End
Servicing Chrysler’s Versatile 3.3L And 3.8L Engines

These engines have a mixed reputation for being high-mileage, dependable powerplants as well as noisy motors that can fail at relatively low mileage. Some 3.3/3.8L V6s have racked up well over 200,000-plus miles on the odometer with no major problems (except some oil burning), while others have called it quits at 70,000 to 80,000 miles.

Hyundai Coolant Service Basics

Most often, a Hyundai with a cooling system issue will find its way to your shop for a few reasons. One is the temperature gauge is reading higher than normal. Of course, that assumes the customer is aware they have a gauge. Another is a leak under the car that has gotten their attention, or maybe the check engine lamp is on and you find a code for excessive engine temp. Or, the car is on the back of a tow truck as a result of overheating on the road.

Tech Feature: Hall Effect Sensor Diagnostics

Hall effect crankshaft position (CKP) and camshaft position (CMP) sensors are critical components of an engine management system. The inputs they provide enable the powertrain control module (PCM) to determine engine speed and position including where a given cylinder is within the four-stroke cycle.

‘Exploring’ Service Needs On The Ford 4.0L V6 Engine

Rated at a rather anemic 210 horsepower, the 4.0L SOHC V6 is not exactly a high output engine. It also has an unusual overhead cam drive setup. Unlike most other OHC V6 and V8 engines that drive both overhead cams directly from the crankshaft with a belt or chain, this engine has an intermediate jackshaft in the middle of the block where a pushrod cam would normally be located.

Diagnostic Solutions: Starter & Battery Diagnostics

Import Specialist Contributor Gary Goms says that early 1900s inventor Charles F. Kettering’s electric self-starter transformed the automobile from a temperamental novelty item into a practical means of transportation.

Transtar Enhances Standard Transmission Product Offering Nationwide

Transtar Industries says it has enhanced its standard transmission product offering by expanding inventory throughout its nationwide distribution network. More customers will now have access to standard transmission products from All Transmission Parts (ATP) with same-day delivery.

Memory Lane: Nuts, Bolts And Screws – Finishing A Chevy Restoration Project

Gary Goms discusses the mechanical challenges of restoring a truck that he began maintaining when he went to work in a gas station – back in 1957!

ZF Services Expands Late Model And Foreign Nameplate Coverage

ZF Services North America has announced the release of its new 2013 Sachs Clutch Catalog with expanded coverage for late-model vehicles and foreign nameplates.

Hyundai Coolant Issues: Getting to the Heart of Coolant Leaks

When it comes to cooling system problems you may see on the Hyundai vehicle lineup, there are a few that would be considered serial failures. But, as these cars accumulate miles, you’ll see the same type of service opportunities you would find on any other vehicle, advises Import Specialist Contributor Bob Dowie.

LuK Clutch Distributes Technical Assistance Poster

Schaeffler Group USA Inc. has initiated the distribution of more than 180,000 LuK-branded technical assistance posters promoting proper diagnosis and installation of clutch kits, clutch hydraulics and flywheels. The poster is designed to help technicians identify common installation errors that lead to unwarranted product returns and reduction in productivity at the shop level.