GM Eight Speed Torque Converter Shudder Solution (VIDEO)

GM Eight Speed Torque Converter Shudder Solution (VIDEO)

The solution to this problem can be lengthy and complicated. This video is sponsored by LubeGard.

Welcome to the GM eight speed torque converter shudder solution by LubeGard. General Motors has issued multiple technical service bulletins on torque converter clutch shudder in the 8-speed, 8L45 and 8L90 transmissions. This problem affects over four million vehicles. That’s 11 different models across three different OE manufacturers between the model years 2015 and 2020. GM’s solution to this problem is lengthy and complicated. It requires a full fluid exchange that uses 20 quarts of an expensive and very specific full synthetic ATF.

Our research and development team went to work by replicating conditions that caused torque converter shudder using our state-of-the-art Falex MultiSpecimen Test Machine. We use this testing platform to create conditions that cause shudder to occur between an automatic transmission friction plate and a steel plate, replicating the movement in a torque converter. When the friction and steel plate specimens were lubricated with the GM recommended ATF alone, shudder and slippage still occurred.

We then ran the exact same test under the same conditions with the addition of Lube Gard Platinum ATF Protectant at a treat rate of two ounces per quart. The shudder was eliminated. The testing also shows that platinum provided control and stabilization of the fluid friction at a constant level throughout the test.

You can avoid the expensive replacement of the OEM ATF by simply adding two 10 ounce bottles or 20 ounces of Lube Gard Platinum ATF Protectant. If you do decide to go with the OEM fluid flush, you can add the platinum and prevent the torque converter shudder from returning. By adding platinum you’ll also be protecting the transmission from friction, wear, heat and additive depletion.

For more information on LubeGard products and where to purchase them, visit our website at www.lubegard.com, or send us an email at [email protected]. Thanks for watching.

This video is sponsored by LubeGard

You May Also Like

What Constitutes A Quality Wheel Hub Assembly?

Discover key factors to consider for quality hub assemblies and how they impact vehicle performance and longevity.

In today’s professional shop environment, you’re often the bridge between the shop owner, the technician and the customer. You need to field questions about what’s right for a wide range of applications – today, I’ll help answer some questions about what to look for in a quality wheel hub assembly.

Needs Come First When Choosing Aftermarket Or OE

It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.

Service Opportunities Still Exist With EVs

Like all ICE vehicles, you need the correct tools, parts and to follow the proper service procedures when servicing EVs. This video is sponsored by The Group Training Academy.

Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Other Posts

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and more with Bill.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.