Instant Shudder Fix (VIDEO)

Instant Shudder Fix (VIDEO)

It can be hard to determine if your shudder is a fluid-related issue or a costly mechanical problem. Sponsored by Lubegard.
https://youtu.be/nUcMZ6zy3LQ

CC:

Welcome to how to apply Instant Shudder Fixx by LubeGard, the number one shudder solution used and trusted by professionals. LubeGard’s Instant Shudder Fixx is a concentrated friction modifier formulated specifically for eliminating torque converter or TCC shudder in automatic transmissions.

As automatic transmissions age, the lockup torque converter’s ability to transfer torque smoothly can decline, and additive packages in automatic transmission fluids can deplete, resulting in torque converter clutch shudder. TCC shudder can also occur in brand-new automatic transmission fluids.

This is due to a frictional deficiency of the fluid and can be easily corrected with the use of a friction modifier such as Instant Shudder Fixx. It can be difficult to determine if your shudder is a fluid-related issue or a costly mechanical problem. Instant Shudder Fixx is a low-cost diagnostic tool that can quickly and easily determine if your shudder is a fluid-related problem or if your torque converter may be failing.

This solution could potentially save you thousands of dollars on an expensive rebuild. To add Instant Shudder Fixx, first locate the transmission dipstick tube or the transmission fluid fill port. Use a pair of scissors or sniffs to cut open the tube. Then use a funnel to help pour the Instant Shudder Fixx into the transmission. The vehicle can be warm or cold.

It’s that simple. It’s that instant. You’re all set. Instant Shudder Fixx will work in all makes and models except for older Ford vehicles manufactured before the 1980s that require type F transmission fluid. Instant Shudder Fixx should not be used in continuously variable transmissions, CVTs, or dual clutch transmissions, DCTs.

Be sure to check your owner’s manual for your transmission type. One two ounce tube of Instant Shudder Fixx will treat a 10 quart system or under. A maximum of two tubes can be used safely in a vehicle with a 10 quart system or under.

Instant Shudder Fixx usually works instantly, as the name implies, but can take up to 20 miles of driving in severe cases. If the shudder problem goes away, your problem was most likely fluid related. If you don’t see any improvement after using Instant Shudder Fixx, then you may have a mechanical problem with the torque converter.

If you had success with Instant Shudder Fixx, then we recommend adding a bottle of our synthetic ATF protectant, LubeGard Red, or our platinum ATF protectant. Both products are compatible with Instant Shudder Fixx and provide long-term shudder relief as well as wear reduction, seal protection, improved shifting, and both products restore additive depletion from new and used automatic transmission fluid.

For more product information, visit our website at LubeGard.com.

LubeGard is the leader in research development and manufacturing of highly specialized synthetic lubricants to various markets.

This video is sponsored by Lubegard.

You May Also Like

EV Safety Basics on the Shop Floor – Part II

As long as you follow the EV guidelines, you are going to have to use the proper PPE and insulated tools.

Staying safe while working on an electric vehicle requires the correct shop equipment as well as the correct personal protective equipment (PPE) and shortcuts are simply not an option. Let’s take a look at everything you are going to need.

We’ll start with PPE and electrical safety gloves. Class zero electrical insulating gloves rated for 1000 volts are required for EV service. Simply put, these gloves prevent high voltage from traveling through your hands, and they must be tested every time you use them by checking for a pinhole or any damage that could allow voltage to pass through a glove. A glove inflator is the most efficient way to do this. Insulating gloves must also be clean and dry so there are no conductive substances that can allow high voltage to travel outside the glove to your arm. Treat these safety gloves with extreme care. They can be damaged easily and they’re sensitive to UV rays, so they should be stored in a dark, dry environment. A ventilated UV-resistant bag is the best option. Safety gloves must also be re-certified every six months. You’ll also wear them with a leather outer glove to protect them, most prefer to wear an inner cotton glove as a liner to allow your hands to breathe.

EV Safety Basics on the Shop Floor – Part I

It’s critical to utilize OEM service information and procedures for each and every hybrid or EV.

Autel MaxiSYS Ultra Enhances Efficiency At Mighty Auto Pro

Time is money in vehicle repair, and the Autel MaxiSYS Ultra is all about enhancing technicians’ diagnostic prowess.

Empowering the Automotive Aftermarket Through Collaboration

Distributors, manufacturers, training institutions, associations and service providers all help automotive professionals stay ahead in a market that is constantly evolving with new technologies, trends and customer demands.

Understanding LSPI & Engine Oil

Using the correct manufacturer-recommended oil is crucial for peak performance and long-lasting engine health.

Other Posts
Tesla Model 3 TPMS Service

When replacing the tires on the Tesla, you will have to service the TPMS sensors.

Topology And Your Scan Tool

Topology influences how you access the modules with your scan tool.

Car properties detailed in "see proof" car image.
Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

Constant-Velocity Axle Options

Whether new or remanufactured, complete CV axle assemblies can throw you a curveball from time to time.