EnerSys Introduces Group 65 Battery To ODYSSEY Performance Series Product Line

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Drivetrain

EnerSys Introduces Group 65 Battery To ODYSSEY Performance Series Product Line

EnerSys has expanded its ODYSSEY Performance Series battery product offering to include the Group 65 battery designed specifically for consumer applications. The ODYSSEY Performance Series 65-760 battery features 762 cold cranking amps (CCA), 129 reserve capacity (RC) minutes and deep cycle capability up to 400 cycles at 80 percent depth of discharge.

Brake and Front End Staff
By Brake and Front End Staff
Published:

power and long service life of the ODYSSEY Performance Series 65-760 battery makes it reliable for truck enthusiasts and ideal for powering the number of onboard accessories found in today’s passenger vehicles and SUVs,” said Dave McMullen, director of commercial marketing for specialty and UPS markets at EnerSys. “We are pleased to add the Group 65 battery to the ODYSSEY Performance Series and provide a wider selection of batteries to customers.”
 
The battery features a three- to 10-year service life and two-year storage life at 77 degrees Fahrenheit (25 degrees Celsius), according to EnerSys. It is vibration resistant, classified as “non-spillable” by the U.S. Department of Transportation and includes a limited four-year full replacement warranty. It also corresponds to Battery Council International (BCI) Group 65.
 
For more information about ODYSSEY Performance Series batteries, visit www.odysseybattery.com.

Related Articles
   

You May Also Like

Drivetrain

AWD and ABS Services

AWD is always engaged and with the ABS brake modulator, can perform like systems with limited-slip differentials.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Brake & Front End magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers. He can be reached at [email protected].
Published:

Many AWD systems came onto the market in the 1990s. Unlike 4x4 truck systems of the day, these systems were always engaged. Many of the early systems used electro-mechanical ways to manage the distribution of power to thefour wheels. 

Most of these systems used viscous differentials and limited-slip differentials with special fluids inside. These components were prone to failure and are expensive to manufacture. The performance of these systems could also be challenging to control with sensors and actuators.

Read Full Article

More Drivetrain Posts
Grinding/Rubbing Noise While Braking At Or Below 10 MPH

This tech tip involves complaints about brake noise in a Ford Escape Hybrid’s system.

By Brake and Front End Staff
Transmissions – CVT

Knowing what the common issues are & understanding the options available to isolate & fix problems are the keys to success.

By Bob Warnke
Simplifying AWD Systems

No matter the manufacturer, there is almost always an all-wheel drive (AWD) option.

By Andrew Markel
Manual Transmission Service

Parts that wear out must be replaced.

By Andrew Markel

Other Posts

Transmission Fluid Hydraulics

You need to know how transmission fluid flows inside an automatic transmission.

By Andrew Markel
Advanced Wheel Bearing Diagnostics

Can a bump set a wheel speed sensor code?

By Andrew Markel
How Well Do You Know Your Driveshaft?

There are three types of modern driveshafts with multiple configurations.

By Andrew Markel
Transmission Service

The following is an example of a dishonest vehicle and how to go about catching it in its lie.

By Dana Deeke