VIDEO: GM Transmissions And Transfer Cases

VIDEO: GM Transmissions And Transfer Cases

GM transmissions and transfer cases are unique to each individual vehicle. This video is sponsored by ACDelco.

If you look under GM vehicles, you might think at first glance that most transmissions and transfer cases look the same. In reality, each transmission is built for a specific application and calibrated for the individual vehicle. This actually makes a GM transmission or transfer case unique for each vehicle.

The secret is in the software that controls shifts, and communicates with the engine and other modules on the vehicle. You can’t just swap a transmission or transfer case with any salvage or aftermarket unit and expect it to work. Inside or connected to a GM transmission or transfer case, is an electronic control module that needs to be programmed if it ever needs to be replaced. This module contains a software that controls the shift, torque converter lockup, and many other functions.

When you receive a genuine GM parts transmission or transfer case at your shop, it can be programmed with firmware unique to the vehicle. These units are plug and play with GM vehicles so you can minimize lengthy installs and labor costs.

GM also offers technicians a subscription based TIS2Web software program for accurate calibration during service replacements of some GM transmissions that require programming after the unit is installed in the vehicle.

New or remanufactured GM Genuine Parts transmission and transfer case assemblies are engineered and built specifically for Chevrolet, Buick, GMC, and Cadillac vehicles. You’ll also find OE driveline assemblies and components for Saturn, HUMMER, Pontiac, and Oldsmobile vehicles.

During the remanufacturing process, almost every component inside the case is returned to like-new condition. In fact, EACH part inside these transmissions is equal in quality to original GM equipment and is designed according to OEM engineering and manufacturing standards. There is no guessing the original manufacturer’s specifications because they are matched or exceeded.

You’ll also get the peace of mind that comes from a “no-hassle” core return policy for transmission assemblies. And each unit comes with a limited warranty that covers parts and labor and is fully transferable, adding value if the vehicle is ever sold. This is a great selling point.

For more information on GM Genuine Parts transmission and transfer cases, visit GM Genuine Parts

This video is sponsored by ACDelco.

You May Also Like

Limited Slip Supplement (VIDEO)

If the frictional properties are not correct, chatter will occur. Sponsored by Lubegard.

Welcome to the Lubegard Limited Slip Supplement overview. Clutch-based limited slip differentials are common on many automotive applications like trucks and SUVs, but they present a unique problem. These differentials often use different clutch configurations, either cone or flat type, made with various materials and frictional requirements. When both wheels have ample traction, the clutch plates bind together tightly, sending consistent power to each wheel. When one wheel slips, additional power is sent to the other wheel based on the frictional properties of the clutch packs. This is where the gear lubricants frictional properties play an important role in functionality and performance.

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Nissan Around View ADAS Camera Calibration (VIDEO)

Always calibrate the around view monitor system after a collision.This video is sponsored by Hunter Engineering.

Collision Blueprinting with Alignment Equipment (VIDEO)

An alignment is usually called for prior to ADAS calibrations. This video is sponsored by Hunter Engineering.

Other Posts

Manual Transmission Failure Causes

One of the most common reasons behind why a manual transmission fails is lack of lubrication.

Simplifying AWD Systems

No matter the manufacturer, there is almost always an all-wheel drive (AWD) option for most platforms.

Drivetrain: Diagnostic Test Drive

Driveshaft problems can be spotted from the moment you put the vehicle in gear to pull it into a bay.

ADAS Calibrations: Accessing the FCA/Stellantis Secure gateway

The secure gateway ensures no procedures are performed without the proper data. Sponsored by Hunter Engineering.