Three Management Mistakes That Can Cost You A Fortune

Three Management Mistakes That Can Cost You A Fortune

We all can agree that competition among employees is good, but there is a right way, and there's a wrong way. The wrong way is to tell your techs that you're going to post the hours they each flag, and at the end of the pay period the winner will receive a reward. Although that sounds good, you'll inevitably end up with one winner, and no matter how you cut it, the rest of your techs are going to be losers.

By Bob Cooper

Mistake #1. Have your technicians compete against one another.
We all can agree that competition among employees is good, but there is a right way, and there’s a wrong way. The wrong way is to tell your techs that you’re going to post the hours they each flag, and at the end of the pay period the winner will receive a reward. Although that sounds good, you’ll inevitably end up with one winner, and no matter how you cut it, the rest of your techs are going to be losers. Now you might think that’s okay because it’s all in fun, and next week they all have another shot at being the winner, right? But the problem is that unless all of your techs have the same experience, the same skills, the same competencies, the same tools, and the same services to perform; over the course of a few months you’ll discover that one or two of your techs will typically come in first, and the rest of your techs will predictably lose.

Instead, give all of your techs the opportunity to win by having them compete against themselves rather than against one another. Here’s how you do it: let’s say you have tech #1 who has been consistently flagging 40 hours, and you know they have the skill and experience to consistently flag 46 hours. You set their goal at 48 hours. If tech #2 has less skill and less experience than tech #1, and if they typically flag 36 hours a week, then they should be striving to flag 43 hours per week, not 48. If you do this with each of your techs, they can then all be winners at the end of the pay period by reaching their individual goals.

Mistake #2. Show them how the job should be done.
I’m not suggesting that you shouldn’t properly train your employees, and of course there will always be a time for you to help, but when it comes to managing people, sometimes the wrong answer will be the right answer obtained in the wrong way. When managing your techs and service advisors, you need to lead them to the answers rather than providing them with the answers. If you give them the answers, all you’re doing is teaching them to come to you when they have a problem, and validating the things they don’t know. Not only does this ding their confidence, but it’s bad for business too. So the next time a tech or service advisor is having a problem, or if they come to you for an answer, the very first thing you should do is ask them what they think. They’ll not only be proud they discovered the solution on their own, but you’ll be doing the single most important thing managers should do: teaching your employees how to solve problems.  Years ago, president Nixon was talking about the welfare system here in America when he said, “If you give a man a crutch long enough you create a cripple.” It’s no different with employee management.

Mistake #3. Ignore your intuitions about an employee. 
When it comes to managing people you need to have a clear understanding of expectations, you need to pay close attention to the facts, and you need to listen closely to that little voice in your head that we call intuition. If you sense you have someone in your company that is not a good fit, or may be a problem down the road, odds are you are correct. Far too many shop owners ignore their intuition, and it eventually costs them a fortune.

For additional help building a more successful auto repair business, learn more about the 1-on-1 coaching and customized action plan offered through the Elite Coaching Program.

 

You May Also Like

Standard Motor Products Announces 123 New Numbers

The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

Standard Motor Products, Inc. (SMP) announced the introduction of 123 new part numbers in its March new number announcement. The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

Internal Combustion Engine (ICE) Segment

Standard’s Fuel Injection program has expanded with eight GDI High-Pressure Fuel Pumps and GDI High-Pressure Fuel Pump Kits. Standard’s line of Variable Valve Timing components also grows with this release. VVT Sprockets have been added for Ford vehicles through 2023, and VVT Solenoids are new for General Motors vehicles. Oil Filter Housing Assemblies are new for popular European vehicles, and Oil Coolers have been added for Nissan and Subaru vehicles. Adding to Standard’s extensive Electronic Throttle Body program, new numbers have been introduced for the 2022 Ford Bronco Sport and 2022-20 Ford Escape, the company said.

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to their study plans.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Auto Care Association Launches REPAIR Act Video

The goal is to emphasize the need for federal REPAIR Act legislation, according to the Auto Care Association.

Other Posts

Valvoline Celebrates Female Service Center Employees

Valvoline is launching a social media campaign led by its female experts who are sharing automotive preventive maintenance tips to promote accessible vehicle care for all.

ASE Education Foundation, Goodguys Continue Partnership

Goodguys is one of many industry relationships the foundation has developed to help solve the technician shortage.

BorgWarner Announces Plan to Reduce Supply Chain Emissions

A partnership with Manufacture 2030 will support BorgWarner in reaching its Scope 3 emissions reduction goal.

Mevotech Releases 237 New Chassis, Control Arm, Wheel End Parts

The release boosts coverage for domestic and import passenger vehicles, pickup trucks, SUVs and EVs up to model year 2023.