OBD II Diagnostics: Checking into Mode $06
In this scan tool diagnostics article, we take a look at Mode $06 functions which govern non-continuous monitors (EVAP, catalyst, EGR, etc.)
Mastering Mercedes Multiplexing
“CAN” is the new buzz word in automobile diagnostics. It stands for Controller Area Network and is a protocol for onboard diagnostics and scan tools. CAN is a high-speed data link that provides more information at a faster rate for better communication between onboard electronics and external diagnostic equipment. Many manufacturers have already started incorporating
Diagnostic Dilemmas: The Effects of Warm-Up Laps on a Running Engine
Most diagnostic technicians have experienced the frustrations of troubleshooting temperature-related engine performance problems. All too often, the true nature of the problem is concealed by the very fact that it occurs only at specific engine temperatures. If the engine quickly passes through the critical temperature range needed to duplicate the problem, the problem can easily
Checking into Mode $06
Mode 06 is the actual system test data that OBD II looks at when it decides to set a pending code or a current fault code. If the test data is within the limits established by the vehicle manufacturer, the item gets a PASS and no codes are set. But if a value is out of range, OBD II flags it with a FAIL and keeps an eye on the component until the system monitor has run at least twice. Then, if the problem is still there, a DTC is set and the MIL light comes on.