Servicing Maintenance-Friendly VW Engines
Volkswagens have always been maintenance friendly. From the very first models, ease of repair and durability have been built into the design. VW has managed to keep basic maintenance procedures relatively uncomplicated throughout the years. In this article, I’ll cover some of the more common underhood procedures on common VW models and include some tips
Monroe Billboard Campaign Drives Home Need for Regular Maintenance
Sponsored by Monroe Shocks and Struts, a brand of Tenneco Inc., the innovative billboard campaign encourages consumers to follow a regular vehicle maintenance schedule, a key element to catching and preventing potential problems with a vehicle’s shocks and struts.
Tie Rod Geometry
Keeping the angles in line with Ackermann Most people consider the common tire rod to be low tech. But, when you consider how front suspensions have evolved from straight axles to independent designs, the tie rod has had to adapt to new angles and geometry. Keeping it on the road was simple with the straight
Diagnostic Solutions: Wheel Bearing Diagnosis
PROPER PROCEDURES AND CORRECT TOOLS PREVENT COMEBACKS Although wheel bearings are often the most neglected part of the vehicle, they nevertheless have a critical job to do, and in most cases, do it very well. Not only are wheel bearings designed to support the weight of the vehicle and allow it to travel over a
Tech Tip: Spotting Problems with a Non-Contact Infrared Thermometer
Being able to measure temperature variances can play an important roll in diagnosing vehicle maladies for both undercar and underhood technicians. This can be easily accomplished by using a non-contact infrared thermometer. With this tool, technicians simply point the thermometer at the area of concern and they are immediately provided with the temperature of the surface in question.
Alignment Equipment
From the brake pad to the shock absorber, every product that you come in contact with at a shop has a history that goes back at least 75 years. We will look at different product categories and track the innovations that have shaped these products and the future for these segments. Alignment Retrospective In the
Monroe Ready to Launch Bigger, Better Undercar ‘Technology Tour’ for Service Professionals
The Monroe Ride & Drive training experience, which has helped thousands of automotive professionals explore the advantages of premium ride control technologies for domestic and import vehicles, will return in an expanded format this year as the Tenneco Technology Tour.
Wheel Bearing Failure Diagnostics
On a typical passenger vehicle weighing around 3,400 pounds, each pair of front-wheel bearings, as well as the rear-wheel or axle bearings, support saround 850 pounds, depending on the weight balance and driveline configuration. If it’s a 6,000-pound SUV, each bearing might carry about 1,500 pounds. This load is concentrated on the relatively small bearing
Management: Tools for Selling Ride Control
It has been estimated by one ride control manufacturer that 80 percent of vehicles in junkyards still have their original shocks or strut units. Part of the reason is that selling shocks and struts is difficult. It is an item that when it wears, it does not cause the vehicle to stop running. When it does wear, the driver is usually not aware of how bad it really has become.
2007 Honda Fit Looks Small on the Outside, Delivers Big on the Inside
The Fit features a 109 horsepower 1.5-liter four-cylinder VTEC engine, a five-speed manual transmission or an available, first in segment, five-speed automatic transmission, and more than 90 cubic feet of passenger volume with multiple seating and cargo configurations.