Amy Mattinat Elected New President Of Car Care Council Women’s Board
The Car Care Council Women’s Board (WB) announces Amy Mattinat, Auto Craftsmen, has been elected the new president of the organization, effective following the WB reception at AAPEX on Tuesday, Nov. 5, 2013 in Las Vegas, Nev. In this position, Mattinat will preside over all meetings and board leadership, and supervise the activities of the board for a three-year term.
Tech Tip: Generation 1 Wheel Bearings With Integrated ABS Tone Ring
The front wheel bearings listed in this Tech Tip all share a unique design feature. They are all double-row angular contact with a split inner ring. The distinctive feature on these bearings is that one of the two seals on the bearing has a built-in magnetic impulse wheel. Caution should be taken to make sure that the seal with the ABS impulse ring is installed in the correct direction.
TECH TIP: WHEEL BEARING HUB AXLE NUT TORQUING
Putting the proper torque on the center nut sets the preload for the bearing and keeps the bearing from separating while in operation. The torque specification for this center nut is critical to the performance and longevity of the hub.
Identifying The Toughest Wheel Bearing Jobs
Some wheel bearing jobs are easy. These are typically unitized hub units. All that is required is removing the caliper, rotor, axle nut and the four bolts holding on the unit. Some wheel bearing jobs can take as many as three hours and require removal of the knuckle from the vehicle. Collected in this article are some of the most difficult vehicles as reported by technicians, labor guides and bearing manufacturers.
Automotive Parts Associates Treats Race Fans To Kansas Speedway Weekend
Mike and Lisa Wilson from Campbell’s Auto Service in Riverview, New Brunswick, Canada; Steve and Denise Doney from Hometown Tire in Williston, Vt.; and Larry and Larry Schultz from Larry’s Service Center in Linden, Wis., were the lucky six people who came to Kansas City on an all-expenses-paid trip.
Wheel Bearings: Pressing Bearings In Less Time With Fewer Comebacks
Servicing these bearings requires a little bit more finesse and tools when compared to hub units or tapered roller bearings. With the right tools and information, these jobs can be moneymakers.
Car Care Council Reports ‘Big Success’ At First-Ever Northwood Auto Show Vehicle Check-Up Event
More than 100 vehicles were inspected on Sunday, Oct. 7, during the first-ever consumer vehicle check-up event hosted by the Car Care Council in conjunction with the Northwood University International Auto Show in Midland, Mich.
Five Wheel Bearing R&Rs That Have a Bad Reputation
Some wheel bearing jobs can take as many as three hours and require removal of the knuckle from the vehicle. Collected in this article are some of the most difficult vehicles as reported by technicians, labor guides and bearing manufacturers.
Tech Tip: Preventing ABS Sensor Failure in Pigtail-Style Hub Assemblies
In this technical bulletin, SKF provides updated technical information for preventing ABS sensor failure in pigtail-style hub assemblies. ABS system failures that happen shortly after hub unit installation can cause concern and customer dissatisfaction. Several items should be checked during the replacement process to prevent additional unnecessary repairs.
ShowMeTheParts-Mobile Receives AAPEX ‘Work Smart’ Award
Vertical Development has announced that its new ShowMeTheParts-Mobile App received the AAPEX New Product Award in the “Work Smart” category.