You searched for Nissan - Page 9 of 66 - Brake & Front End
Tech Feature: Nissan Brake and Suspension Repairs; Solving Noise Complaints

At first, you may not think brake and suspension systems are closely related. But when it comes to noise and vibration complaints, you don’t want to be looking at one without considering the other.

Nissan Tech Tip: DTC for Variable Valve Timing Control Function

On any 1996-2009 vehicle with variable valve timing, if the MIL is on with any of the following DTCs stored: P0011, P0014, P0021, P0024, P1110 or P1135, do not replace the variable valve timing solenoid valve or the sprocket(s) without performing the complete diagnosis indicated in the EC section of the service manual.

Nissan Tech Tip: DTC For Variable Valve Timing Control Function

On any 1996-2009 vehicle with variable vale timing, if the MIL is on with any of the following DTCs stored: P0011, P0014, P0021, P0024, P1110 or P1135, do not replace the variable valve timing solenoid valve or the sprocket(s) without performing the complete diagnosis indicated in the EC section of the service manual.

Tech Feature: Cooling System and Water Pump Service for the Nissan 3.5L V6

The cooling system on late-model Nissan Altimas and Maximas with the 3.5L V6 engine is similar to many other late-model vehicles in that the water pump is buried and typically takes two to three hours to replace depending on the model, year and your manual dexterity.

Tech Tip: Nissan Exhaust Buzz/Rattle on Acceleration

If you confirm that there is an exhaust rattle/buzzing noise that sounds like it’s coming from the front exhaust tube on an applied vehicle, take the following actions. First, inspect both of the catalyst front tube support brackets for breaks, cracks or missing bolts. If you determine that the support brackets need to be replaced ….

Tech Tip: Nissan MIL On/DTC P1491 Set

A 2001 Frontier (D22) or Xterra (WD22) may exhibit one or both of the following symptoms: MIL "On" with DTC P1491 (Vacuum Cut Valve Bypass Valve – VC CUT/V BYPASS/V) stored in the ECM; and/or difficulty refueling the vehicle. The vehicle’s fuel tank may need to be replaced. Use the appropriate Service Procedure provided in this bulletin to diagnose and repair these incidents, if they should occur ….

Tech Tip: Oil Cooler Leak on Nissan Maxima and Murano Vehicles

You may get one of the Nissan vehicles listed below in the shop with engine oil accumulated on the engine block below the engine oil cooler area. Inspect the engine, engine oil cooler and the oil cooler gasket for oil leakage. You may use a fluorescent oil dye leak detector to help more easily determine which component is leaking. If the oil is leaking from the oil cooler rubber gasket, replace the rubber gasket using the following manufacturer’s Service Procedure ….

Tech Tip: Single Fix for Multiple Nissan O2 Sensor Codes

If one of the vehicles listed in this Tech Tip comes into the shop with the "Malfunction Indicator Lamp" (MIL) "ON" and one or more of the following Diagnostic Trouble Codes (DTCs) are stored in Engine Control Module (ECM), the repair may be as simple as installing an additional ground sub-harness ….

Tech Tip: Repairing Nissan Oil Cooler Leaks

You may get one of the Nissan vehicles listed in this Tech Tip in the shop with engine oil accumulated on the engine block below the engine oil cooler area. Inspect the engine, engine oil cooler and the oil cooler gasket for oil leakage. You may use a fluorescent oil dye leak detector to help more easily determine which component is leaking. If the oil is leaking from the oil cooler rubber gasket, replace the rubber gasket using the ….

Tech Tip: Diagnosing Nissan Quest Gear Whine Noise

If a 1999-2000 Quest exhibits a gear whine noise between 25 mph and 70 mph under light throttle application (i.e. 1/8 to 2/8 throttle applied), use the following service procedure to resolve the incident. Road-test the vehicle to confirm the incident exists. Park the vehicle on a ….