Hydraulic Control Units
The ABS module and HCU are the heart of any ABS or stability control system.
Advantages of a Pre-Assembled Knuckle Hub Assembly
Wheel bearings are a common repair, but they often present challenges during installation, taking additional time we don’t have to spare, and in some cases resulting in a comeback or quality that isn’t up to our standard. Generation 1 (press in) wheel bearings have always been the most difficult, and while Generation 3 (incorporated hub
EV Fleet Service Opportunities
If a fleet has gone electric, there are just as many service opportunities as internal combustion vehicles.
Dodge & Jeep Front Click Noise at Low-Speed Turns
This applies to vehicles equipped with Brembo 6-Pot Fixed Caliper Brakes or High Performance Brakes.
Best Tech Advice: Replace Pads AND Rotors
Replace the rotors AND the pads during the same service. Sponsored by The Group Training Academy.
A Complete Job Starts With A Thorough Brake System Inspection
A complete job is critical for optimum driver safety. This video is sponsored by The Group Training Academy.
Brake Hardware
Specific hardware does not do its job if it is left in the box.
NAPA Auto Parts Chooses Brembo for Premium Brake Line
New product partnership expands brake parts offering.
ADAS Suspension Alignments
Look at the “big picture” and really consider how the vehicle will operate if things aren’t done correctly.
Replacing Master Cylinders
The most common problems that occur in the master cylinder are wear in the piston bore and piston seal failure.