News: KYB Taps Mike Fiorito
KYB America LLC recently named Mike Fiorito to the position of director of business development, announced KYB Senior Vice President Mike Howarth. “As KYB continues to expand in the North American aftermarket, and with the recent announcement by CARQUEST that KYB will become its full line shock and strut supplier, we had a need to
The Future Of Climate Control
What Role Will Alternative Refrigerants Play? There has been a lot of discussion lately about the future of automotive refrigerants and their impact on the environment. Ozone depletion is no longer the main concern. Now it’s global warming. Last year was the warmest year on record. Average temperatures all across the globe are on the
BMW Maintenance: The Right Equipment and Information Make Service Profitable
Well-designed and durable, the cars from Bavaria have had a reputation for handling and performance that many other manufacturers only aspire to. In the last 50 years, BMWs have gone from the three-wheeled Isetta microcar of the 1950s to today’s powerful and comfortable high-performance machines with all of the latest technology. One of my favorite
Directions: Optimistic Industry Trends Can Mean Full Bays
As the editor of an automotive aftermarket business-to-business magazine, I get forests of news items, press releases and industry trend reports each month. Looking over some recent releases, I’ve found that there seems to be quite a bit of optimism for our industry and your businesses. For example, one headline that just crossed our desks
AC Update: Finding and Fixing Leaks
Finding refrigerant leaks is a major aspect of A/C service. It makes no sense to recharge a leaky system with refrigerant if it will soon leak back out. Ultraviolet dyes can make even the smallest leaks clearly visible. But not all OEMs approve of their use. The domestic OEMs (Ford, GM and Chrysler) all use
Tech Tip: Belts & Tensioners
Many engines today have two or more belts that will need to be replaced at some point. One is the timing belt, if the engine has an overhead cam design and uses a belt rather than a chain to drive the cam(s). The other is one or more serpentine belts on the front of the engine that drive the engine’s accessories, such as the alternator, power steering pump and A/C compressor.
Tech Tip: PCMs – The World of Vehicle Computers
When a vehicle’s powertrain control module (PCM) starts acting up, almost anything can happen. The engine might not start, or if it does, it might not idle properly or run smoothly. PCM failures may involve one of the driver circuits for the fuel injectors or the ignition coils.
Better Breathing: EGR Improvements
So Why Do We Have EGR? By Glen Beanard, technical contributor The Exhaust Gas Recirculation (EGR) system was created in the early 1970s for the same No. 1 ranking motivation that drives every other engine management system design — to reduce emissions. The EGR valve targets one specific pollutant, oxides of nitrogen (NOx). Under normal
Acura Tech Tip: Radiator or Condenser Fan Operates Continuously
If the radiator fan and/or the condenser fan runs continuously; or, if the fan(s) runs continuously when the engine is off, the battery may be discharged.
Leak Detection: Becoming Your Shop’s Leak Detective
When a customer’s A/C system isn’t cooling well and the refrigerant charge is low, you know the system is leaking. The question is where? Finding refrigerant leaks on today’s vehicles can be a challenge. For one thing, many of the A/C system parts are buried and difficult to reach. Also, most systems today hold much