Subaru Tech Tip: Error Codes Following Wheel Bearing Hub Replacement
On the hubs for 2005-2014 Subaru Legacy and Outback applications, a speed sensor mounts into the knuckle. It’s exposed end extends out behind the bearing to capture pulses from an encoder ring on the back of the bearing.
Preventing ABS Sensor Failure In Pigtail-Style Hub Assemblies
ABS system failures that happen shortly after hub unit installation can cause concern for technicians and dissatisfaction for customers. Several items should be checked during replacement to prevent comebacks.
VIDEO: Should Axle Nuts Be Reused On A New Hub Or Axle?
Should the axle nut be replaced when a new wheel bearing or CV joint is replaced? Andrew Markel discusses when to replace the axle nut as well as the proper torque procedure when using an axle nut socket. Sponsored by BCA Bearings.
Alltech Automotive Adds 26 New SKUs To Its Wheel Hub And Bearing Assembly Lines
Alltech Automotive has announced the addition of 26 new part numbers to its wheel hub and bearing assembly product line, covering vehicle manufacturers from Acura to Volvo, and including 15 years of additional vehicle coverage through 2016. “With these additions, we at Alltech Automotive continue to be one of the major suppliers of wheel hub
Wheel Hub Damage Analysis
Loss of bearing retention is the leading cause of hub bearing damage, resulting in wheel vibration and/or noise. The axle retaining nut backs off when bearings demonstrate improper torque or have lost their self-retention features. This changes the setting of the bearings inside the hub, causing misalignment and accelerating wear.
SKF Introduces New Hub Bearing Part Numbers For Jaguar, Chevrolet, Ford, Lincoln And Jeep
SKF recently announced the availability of seven new hub bearing part numbers specific to Jaguar, Chevrolet, Ford, Lincoln and Jeep. The new part numbers cover applications including: • the front wheel of the 2004-‘09 Jaguar XJ, XK, Super V8 and Vanden Plas (BR930217) • the front wheel of the 2009-‘14 Jaguar XF, XFR and XFR-S
Worn Wheel Hub Bearing Symptoms
Driving conditions and installation practices can damage a worn hub. These symptoms often indicate wheel bearing damage.
LTI Tools Offers Universal Wheel Bearing Hub Removal Tool
Safely remove all frozen hubs instantly with LTI Tools’ Universal Hub Shocker Wheel Bearing Hub Removal Tool (LT830A). Its universal fit mounts to all axle bolted hubs – 5-, 6- and 8-lug hubs. And it mounts to two studs using supplied flanged nuts in seconds.
AME International Offers Hub Buddy XL Hub/Disc Surface Cleaner
The easy-to-use Hub Buddy XL is a new Impact-Rated Hub/Disc Surface Cleaner from AME International for automotive tire service techs. It removes rust, corrosion and other buildup from wheel stud, drums and tire rims.
Tech Tip: ABS Light On Or False ABS Activation After Wheel Bearing Hub Replacement
If you diagnose a bad hub bearing on one side of a vehicle, and the ABS wheel speed sensor or tone ring is integral to the bearing, you may need additional repairs to restore proper ABS functioning. In many cases, replacing one hub bearing will cause the driver to feel ABS false activation when coming to a slow stop on dry pavement.
