You searched for Lubrication - Page 47 of 49 - Brake & Front End
Dana Corporation Coating Technologies Lower Emissions, Improve Engine Durability and Performance

Dana Corporation has announced that it has developed two advanced coating processes for engine bearings and piston rings that greatly improve their durability. Products with these advanced coatings will be on display at the 61st International Motor Show (IAA) in Frankfurt, Germany, through Sept. 25 at Dana’s exhibit.

Mileage Maintenance

A mere 0.7 of a mile does not sound like much, it is about 3,700 feet, or less than one-third the distance around Daytona International Speedway. On average, the U.S. population of vehicles will get 20 miles per gallon (including light trucks and passenger vehicles). A 0.7 of a mile improvement represents only a 3.5

LUBEGARD To Present Technical Seminar at Powertrain Expo

LUBEGARD by International Lubricants, Inc. (ILI) will present an in-depth technical lubrication seminar at the upcoming ATRA Powertrain Expo in Las Vegas. The seminar will be Friday, Sept. 30, 11:00 a.m. to 12:30 p.m.

Brake Lubricants: High Temperatures Require High Performance Products

When it comes to brake lubricants, grease is a dirty word. Brake lubricants are specially-formulated products that are NOT the same as ordinary chassis grease or even multi-purpose grease. The kind of grease that’s used to lube tie rod ends, ball joints and U-joints is not the same as the lubricants that are required for

Gear Lubes

Replacement of Gear Lubes Can Prevent Expensive Driveline Problems

Not All Brake Lubricants are Created Equal

When it comes to brake lubricants, grease is a dirty word. Brake lubricants are specially formulated products that are not the same as ordinary chassis grease or even multi-purpose grease. The kind of grease that’s used to lube tie rod ends, ball joints and U-joints is not the same as the lubricants that are required

Aftermarket Update

Carter Helps Eliminate Fuel Delivery Service Comebacks Carter Fuel Delivery Products has developed a variety of innovative training tools and other materials to help aftermarket professionals eliminate customer comebacks and product returns associated with the diagnosis and repair of fuel system problems on millions of late-model vehicles. Carter has introduced an interactive Fuel Delivery Diagnostics

Flushing Away Engine Problems

When motor oil isn’t changed often enough, varnish deposits and sludge begin to form inside the engine. If the oil is neglected long enough, it will eventually turn into goo and ruin the engine. “Oil sludging” has become a serious problem in recent years for a number of reasons. One is that more new car

Oil Change Intervals

Oil Change Intervals

Internal Engine Repairs: Begin with Diagnosing Engine Failure Culprits

Saab engine technology has evolved through the years, but the same basic design of the original B202 engine is still used in today’s Saabs. When the 16-valve 2.0L engine (B202) was developed in 1984, I was one of 10 people chosen from the East Coast area by Saab in the United States to attend a