Performing Hyundai Maintenance and Profiting From It
Like so many other late-model vehicles, the Hyundai vehicle lineup won’t necessarily keep your bays busy with “repair” work, but can present you with profitable maintenance opportunities. We can no longer afford to let any opportunity for service go unnoticed, and hope that the customer will come back for the next job. It’s an important
How Tread Design Impacts Wear, Traction, and Noise
When delving into the world of tread designs, one thing that is always fascinating is the size of the contact patch through which the tread design must roll. On an average-size passenger car tire, the contact patch is about the size of a 4×6-inch postcard. In total, all four contact patches reach about the size
Fleet Management and Warranty Companies: What’s the Difference?
In the case of a warranty company, the company has a direct vested interest in the costs of the repairs. Such companies sell a repair contract on a single vehicle where certain items on the vehicle are specifically named. The company will pay for, or toward, the repair of those specifically named items within the
Replacing FWD Wheel Bearings
When a wheel bearing goes out on a FWD car or minivan, it may or may not give much warning. Typical clues include noise from the vicinity of the wheel, possibly some steering wander or looseness in the steering, and/or some abnormal tread wear on the front tires. Also, an ABS light could illuminate. Any
Seasonal Service
It’s that time of year again. Time to start promoting seasonal service checks. So before family hits the road for vacation with gas possibly hitting $3 per gallon, here are some service items that should be checked. TIRES Tires obviously play a very important role in safe driving because of their affect on traction, handling
Small Town Inc.
Dealing with City Hall: A Case Study
Servicing Cartridge FWD Wheel Bearings
Early front-wheel-drive wheel bearing service was difficult and time intensive. The most common arrangement was a pair of tapered roller bearings similar to that of a rear-wheel-drive vehicle, but with a spacer between the bearings. Servicing this arrangement took time and often special tools. Of course, an axle shaft went through the bearings and spacer.
Performing a Pre-Alignment Inspection: Step-by-Step, Brake & Front End
Rack on the floor Secure vehicle on rack. Leave transmission in park or 1st gear on manual transmission cars. Level and lock steering wheel with a holder. Perform a simple bounce test. Check for excessive bounce and noise. Underhood inspection Check engine mounts and struts by rocking the vehicle fore and aft. Inspecting these items
Are You Aware?… April is Designated as National Car Care Month
Did you know that next month is National Car Care Month (NCCM)? Do you have any activities or an event planned to take part in this campaign? If not, it’s not too late ‹ there’s still time to plan something for your shop. You can produce a small event with a vehicle check lane in
Parking Brakes: The Forgotten Fourth Pedal…Or the Seldom-Used Stick
How Much Is Really Enough?