Kia: Timing Belt Replacement
This month, we’re going to take a look at timing belt replacement on the increasingly popular Kia line of vehicles. Kia has made strong inroads into the market by offering high-quality vehicles at an affordable price. As import car techs, we’re prepared to handle any of these cars: We have the required skills and, with
Tech Tip: Crown Victoria Suspension Sits Low in Front
Some 2003 Crown Victoria/Grand Marquis base vehicles with steel wheels or vehicles equipped with the handling package may appear to have a harsh ride in the front end of the vehicle. This may be caused by the front springs. To correct this, replace the existing springs with revised springs. The revised springs provide a higher ride height at curb and reduce the possibility of the front being too low.
Tire Tech Tip: Selling Nitrogen can Pump up Profits
For the past five or so years, suppliers of nitrogen-inflation equipment have made serious claims. Compared to moisture- and dirt-laden compressed air, nitrogen – a dry, inert gas – runs cooler, does not permeate through rubber as quickly and does not cause rust to develop on steel cords, expensive wheels or tire pressure monitoring sensors. The result is better fuel economy, more consistent inflation pressure, longer tire life and increased safety, advocates say.
The 10 Commandments for Selling Shocks and Struts
The first step in selling ride control is the inspection process. A visual inspection of the shocks and struts can tell you a lot about the state of the ride control units. This is a chance to make sure the vehicle is road-worthy before you put your own life at risk. Also, always make sure that there is enough gas in the tank.
Mitch Schneider: When Bad Luck is Really Good Luck…
About the worst thing that can happen around here is a week where all kinds of bizarre things accumulate. Aside from the absolute chaos it inflicts on everyone, including me, the crush of dealing with multiple crises makes it almost impossible to identify where one calamity ends and another begins.
ALLDATA Releases New Updates
As part of its quarterly update process, ALLDATA has added more than 200,000 pages of service and repair information, plus more than 4,000 pages of Technical Service Bulletin (TSB) data. The release reflects new and updated information from U.S., Asian and European auto manufacturers.
Tech Tip: Maintaining Belt Tension is Critical
Most late-model engines have serpentine belt drives for the engine-driven accessories. And most people know that belts are a maintenance item and eventually have to be replaced. But many don’t know the spring-loaded automatic tensioner that keeps a serpentine belt tight is also a wear item. Consequently, the automatic tensioner may also have to be replaced when the time comes to change the belt.
Publisher’s Perspectives: If it’s Not Broke, Fix it Anyway
What’s your definition of preventive maintenance? Does it differ from your definition of scheduled maintenance? The term “preventive maintenance” is often used interchangeably with “scheduled maintenance,” but there’s a difference. Preventive maintenance means recommending the service or replacement of certain parts because they are wearing out and nearing the end of their useful life. Repair
Selling Services: Reading Tires to Diagnose Suspension Problems
As a rule, all tires should wear evenly across the full face of the tread as long as wheel alignment is correct, the tires are maintained at the recommended inflation pressure, and the vehicle is driven sensibly. Any kind of tire wear that deviates from the norm, therefore, usually indicates trouble. SHOULDER WEAR Take heavy
Selling Services: The 10 Commandments for Selling Shocks & Struts
THOU SHALL PERFORM A VISUAL INSPECTION: The first step in selling ride control is the inspection process. A visual inspection of the shocks and struts can tell you a lot about the state of the ride control units. This is a chance to make sure the vehicle is road-worthy before you put your own life