MEYLE Debuts Two New Component Brake Discs

MEYLE Debuts Two New Component Brake Discs

The brake discs comprise an Aluminium or stamped steel hat riveted to the cast iron friction ring.

MEYLE is expanding its product range to include the two component brake discs for common BMW and Mercedes models. The new brake discs are now available and offer customers the usual OE qualities such as accurate fit, low offset, reduced weight and the associated fuel savings and decrease in CO2. At the same time, the new brake discs boast high performance, driving comfort and sophisticated design, the company states.

Thanks to its new products, MEYLE is expanding into the aftermarket for brakes with solutions in areas previously reserved for vehicle manufacturers with their original parts. Seven new references for the two component MEYLE PD brake discs are now available for the BMW models 3 to 8 Series, X3 to X5, and Z4, and for Mercedes C-Class and E-Class models, the company notes.

The brake discs comprise an aluminium or stamped steel hat riveted to the cast iron friction ring. The two component MEYLE PD brake discs also offer the typical MEYLE PD qualities, including high performance, driving comfort and sophisticated design.

In addition, they are ECE-R90-certified and, due to the high-quality surface coating, do not require degreasing, thus ensuring long-lasting protection against corrosion. A higher percentage of carbon makes the two component brake discs exceptionally resistant to heat distortion even in cases of higher thermal stress – for example, on steep mountain descents – for extended driving comfort without vibrations. To ensure efficient installation at the workshop, 99% of the brake discs are equipped with a fixing screw.

For more information visit https://www.meyle.com/en/two-component-brake-discs/

You May Also Like

Coats Expands Maxx Tire Changer Line With MAXX 50

The base Maxx tire changer platform now comes in 4 models total.

The Coats Company proudly announces the expansion of their Maxx tire changer line with the Maxx 50 tire changer. The Maxx 50 tire changer features many of the key Maxx features but gives low-volume shops the ability to get a best-in-class tire changer with only the essential tools they need. 

AP Emissions Unveils August New Product Announcement

10 new 46-state Federal EPA part numbers have been released.

Hunter Engineering Expands Supply Capabilities in Missouri

Company continues to efficiently serve customers despite supply chain challenges.

Autel Adds EV Diagnostics, Maintenance to Class Roster

Classes are intended for current and potential owners of Autel EV diagnostic tablets.

SMP Expands Emission Control Program

SMP’s Emission Control program offers more than 1,500 EVAP components and 4,000 products for crankcase and EGR emissions.

Other Posts

Schaeffler Recognized as PACE Award Finalist

The company was named an award finalist for its eRocker System.

Stellantis Expands, Enhances Parts Business

Stellantis’s bproauto aftermarket parts brand is expanding to North America with 30 parts categories.

FCS Adds 57 New Numbers

All of these units are in stock and ready to ship on the FCS website.

Autel Releases 2023 ADAS Calibration Coverage

The new DTC analysis feature provides detailed fault cause possibilities, and suggested fault solutions.