Alignment Specs: 2011-2018 Volkswagen Touareg
The Touareg is not your typical vehicle to align. It has a stability control system that needs a recalibration of the steering angle sensor if the toe front or rear is adjusted. On vehicles with air ride systems, lifting the vehicle for a repair requires that the vehicle lift mode must be activated. The vehicle lift mode switches the air suspension control off. This prevents readjusting of the air springs when the vehicle is lifted. Vehicle lift mode is automatically switched off at a speed above 3 mph.
Air Ride Diagnostics: 2003-2010 VW Touareg Applications
This is a full-feature air ride system designed to improve comfort, stability and off-road capabilities. Some vehicles with the 4XMotion option will also have a sway bar that can be decoupled to increase wheel travel.
2003-2010 VW Touareg Air Ride Suspension Repair And Diagnostics
This is a full-feature air ride system designed to improve comfort, stability and off-road capabilities. Some vehicles with the 4XMotion option will also have a sway bar that can be decoupled to increase wheel travel. The struts have active dampeners that control compression and rebound. The driver can also control the height.
VW Touareg 2003-2010 Air Ride Diagnostics And Replacement
The Volkswagen Touareg was the first VW SUV and the first to get an air ride suspension system. The luxury SUV shares the same platform as the Audi Q7 and Porsche Cayenne. This is a full-feature air ride system designed to improve comfort, stability and off-road capabilities. Some vehicles with the 4XMotion option will also have a sway bar that can be decoupled to increase wheel travel.
Volkswagen Feature: Don’t Miss Out On Missed Maintenance
“We don’t work on those V8s.” I’ve often heard that said in reference to the 4.2L VW and Audi 8 cylinders. Some criticisms are that the timing belts require too many special tools and you can’t see the engine. I hear a lot of excuses when it comes to V8 Audis and VWs, but, in reality, they are not much different than the V6s and most models don’t require too many special tools. There are many shops that don’t want to do a timing belt replacement on the 4.2 V8, but it’s time to buy the tools and stop sending good paying jobs to competitors.
Tech Tip: Volkswagen’s MIL On with DTC P129F/P310B Set
Due to fuel intrusion into the low pressure side fuel pressure sensor (G410), a false signal may be sent to the ECM resulting in a reading that is out of tolerance. A false signal may result in illumination of the malfunction indicator lamp (MIL) and DTC P129F or P310B being stored in fault memory. There is now an improved fuel pressure sensor (G410) to aid against fuel intrusion.
TRW Launches Brake Pad Wear Sensors For North American Aftermarket
TRW’s North American (NA) Aftermarket Group has launched a range of original equipment (OE) quality brake pad wear sensors to complement its all-makes friction program. The brake pad wear sensor is an added safety feature on many vehicles used to warn a vehicle’s driver when the brake pads become too low. “Because we understand that
Tech Tip: Generation 1 Wheel Bearings With Integrated ABS Tone Ring
The front wheel bearings listed in this Tech Tip all share a unique design feature. They are all double-row angular contact with a split inner ring. The distinctive feature on these bearings is that one of the two seals on the bearing has a built-in magnetic impulse wheel. Caution should be taken to make sure that the seal with the ABS impulse ring is installed in the correct direction.
Expect to See More Turbocharged Vehicles in Your Shop
As gas prices remain high this summer driving season, Honeywell Turbo Technologies says it is working with auto manufacturers to meet the increase in demand for affordable and fuel-efficient downsized turbocharged engines.
TPMS Intel On VW Applications
Before any relearn or reset procedure is performed on a direct or indirect system, set the tires to the correct pressure. When the system is reset, it uses this pressure as the reference pressure. If it is not correct, the system might assume an incorrect pressure is the correct pressure.
