Jimmie Johnson, MOOG-Equipped #48 Chevrolet Increase Chase Points Lead; Crew Chief Chad Knaus Named 'Problem Solver of the Race' at Charlotte

Jimmie Johnson, MOOG-Equipped #48 Chevrolet Increase Chase Points Lead; Crew Chief Chad Knaus Named ‘Problem Solver of the Race’ at Charlotte

Four-time defending NASCAR Sprint Cup champion Jimmie Johnson and the MOOG chassis parts-equipped #48 Lowe's Chevrolet recovered from an early accident to increase their 2010 Chase points lead with a third-place finish in Saturday's Bank of America 500 at Charlotte (NC) Motor Speedway. Following the race, Johnson's crew chief, Chad Knaus, was presented Federal-Mogul Corporation's MOOG "Problem Solver of the Race" Award.

Four-time defending NASCAR Sprint Cup champion Jimmie Johnson and the MOOG chassis parts-equipped #48 Lowe’s Chevrolet recovered from an early accident to increase their 2010 Chase points lead with a third-place finish in Saturday’s Bank of America 500 at Charlotte (NC) Motor Speedway. Following the race, Johnson’s crew chief, Chad Knaus, was presented Federal-Mogul Corporation’s MOOG “Problem Solver of the Race” Award.

Race winner Jamie McMurray (#1 Bass Pro Shops/Tracker Chevrolet) also relied on MOOG chassis parts, continuing the brand’s dominance of the season-ending Chase series.

The MOOG Problem Solver award is presented to the crew chief whose car posts the largest increase in average lap speed during the second half of each Sprint Cup event while finishing on the lead lap. Johnson and the #48 Chevrolet improved by a race-high 0.297-second per lap in the second half of Saturday’s race.

Johnson, who now leads the Chase by 41 points, nearly saw his hopes for a fifth straight championship vanish during a spin-out on lap 34. The #48 Chevrolet escaped from the incident unscathed and Johnson was able to quickly regain dozens of positions through a combination of hard driving and a smart pit strategy. He was back in the top five by lap 132 and ran strong over the remaining 202 trips around Charlotte’s challenging 1.5-mile quad oval.

“You can never count Jimmie and Chad out of a race until you see their car leave the track,” said Federal-Mogul Motorsports Director Tim Nelson. “They worked together flawlessly to manage the problem and get the #48 car back into contention. We’re thrilled that MOOG components helped them steer back into the top five.”

MOOG steering and suspension components are the leading choice of crew chiefs and automotive repair professionals. The unique benefits of MOOG components and other Federal-Mogul products are highlighted in the company’s innovative "Smart Choice" campaign, which reinforces the message that longer lasting, better performing replacement parts are today’s best option for technicians and consumers.

For additional information regarding MOOG chassis parts, visit the brand’s technician-focused www.moogproblemsolver.com website or contact your MOOG supplier.  To learn more about the Federal-Mogul “Smart Choice” campaign, simply visit www.FMSmartChoice.com.

About Federal-Mogul
Federal-Mogul Corporation is a leading global supplier of powertrain, chassis and safety technologies, serving the world’s foremost original equipment manufacturers of automotive, light commercial, heavy-duty, agricultural, marine, rail, off-road and industrial vehicles, as well as the worldwide aftermarket. The company’s leading technology and innovation, lean manufacturing expertise, as well as marketing and distribution deliver world-class products, brands and services with quality excellence at a competitive cost. Federal-Mogul is focused on its sustainable global profitable growth strategy, creating value and satisfaction for its customers, shareholders and employees. Federal-Mogul was founded in Detroit in 1899. The company is headquartered in Southfield, MI, and employs 43,000 people in 34 countries. Visit the company’s website at www.federalmogul.com.

Federal-Mogul’s aftermarket products are sold under a variety of brands, including but not limited to, AE engine products, ANCO wipers, Champion spark plugs and wipers, Fel-Pro gaskets, Ferodo brake pads, Glyco bearings, Goetze piston rings, MOOG chassis products, National wheel-end components, Nüral pistons, Payen gaskets, Sealed Power engine products and Wagner brake and lighting products. Visit the company’s website at www.federalmogul.com.

You May Also Like

Mobis Starts Construction of EV Battery System Plant in Spain

The new EV battery system plant will supply Volkswagen and is aiming for mass production by 2026.

Mobis announced it has begun building a new electric vehicle battery plant in Navarre, Spain. The company, which has similar facilities in Korea, China, and the Czech Republic, is also developing plants in the U.S. and Indonesia. The Spain plant will focus on serving Volkswagen.

The Mobis plant is expected to start mass production by 2026. The plant will play a crucial role in Mobis' strategy to expand its global footprint and electrification efforts, the company noted in a recent press release. Last year, Mobis secured a major contract to supply battery systems to Volkswagen.

Blink Charging UK, Evri Collaborate to Electrify Courier Fleet

EV chargers installed at Rugby enhance Evri’s sustainability efforts, supporting a greener future in parcel delivery across the UK.

Pricing Alignments

Why ordering off the menu can hurt your shop and customers.

BCA Bearings Unveils 2024 Endless Summer Promotion

The Endless Summer promotion runs from May 1 through June 30, 2024.

PRT Launches 30 New Complete Strut Assemblies

The new items represent more than 10 million vehicles in new coverage, PRT said.

Other Posts

ADAS False Activation Evolution

The logic behind most ADAS warnings or corrections is to examine the plausibility of the situation.

Toe Angles and Ride Height 

Zero toe angle is present when both tires are parallel to the center thrustline.

Sona Comstar Inaugurates Manufacturing Plant in Mexico

The new facility will specialize in producing differential assemblies and reduction gears meticulously designed for BEVs.

Axle Torque Procedures

Guessing the correct torque setting is a bad idea.