Pontiac Tech Tip: Grinding and/or Growling Noise in Park on Incline

Pontiac Tech Tip: Grinding and/or Growling Noise in Park on Incline

Owners of some vehicles equipped with Hydra-Matic front wheel drive transaxles may comment on a grinding and/or growling noise that is noticeable when standing in PARK on a hill or slope with the engine running and the parking brake not applied.

Affected Models:
2007 and prior Pontiac passenger cars and light trucks with Hydra-Matic front wheel drive (FWD) automatic transmissions.

Service Information:
Owners of some vehicles equipped with Hydra-Matic front wheel drive transaxles may comment on a grinding and/or growling noise that is noticeable when standing in PARK on a hill or slope with the engine running and the parking brake not applied. Under these conditions, the weight of the vehicle puts a load on the parking pawl which can create a “ground-out” path through the drive axles, front struts, springs and spring towers. Normal engine noise can be transmitted to the passenger compartment through the “ground-out” path.

Owners concerned about this condition should be advised to apply the parking brake prior to shifting into PARK. This is the recommended procedure described in the owner’s manual. Applying the parking brake first will put the load of the vehicle on the rear brakes rather than on the parking pawl.

Refer the owner to the appropriate owner’s manual for additional details and instructions.

Courtesy of Mitchell 1.

For more information on Mitchell 1 products and services, automotive professionals can log onto the company’s website at www.mitchell1.com.

You May Also Like

Mullen Announces New CARB Certification

The certification is awarded to vehicle manufacturers who meet specific emissions standards in compliance with CARB regulations.

 Mullen Automotive, Inc., emerging electric vehicle (“EV”) manufacturer, announced certification from the  California Air Resources Board (“CARB”) on the 2025 Mullen THREE, Class 3 all-electric low cab forward chassis truck. The certification is awarded to vehicle manufacturers who meet specific emissions standards in compliance with CARB regulations. The District of Columbia and 14 states, including California, have adopted vehicle standards under Section 177 of the Clean Air Act (42 U.S.C. §7507), which requires additional approvals beyond EPA regulations.

Schaeffler Group USA Expands Product Portfolio

Seventy new parts have been added to the INA, LuK and Schaeffler Bearings portfolios in the first quarter of 2024.

Nissan CVT Clutch Point Relearn Procedure

The Adaptive Shift Control delivers responsive and powerful acceleration.

Hydraulic Power Steering Service Opportunities

Hydraulic power steering is still the choice for some platforms and applications.

Hunter Maverick Tire Changer: 19.5-inch Tire Service

Learn to handle 19.5-inch wheels, which are common on some delivery vehicles, with Hunter’s Maverick tire changer.

Other Posts

Curing Shock, Strut and Suspension Noise

As vehicles age, eliminating noise is Job 1. But ‘noise’ may mean different things to you and your customers.

Diagnostic Test Drive For Drivetrain

A driveshaft center bearing can fail due to the bearing and the rubber isolator.

Mobis Starts Construction of EV Battery System Plant in Spain

The new EV battery system plant will supply Volkswagen and is aiming for mass production by 2026.

Blink Charging UK, Evri Collaborate to Electrify Courier Fleet

EV chargers installed at Rugby enhance Evri’s sustainability efforts, supporting a greener future in parcel delivery across the UK.