AAM Adds New Chevy Camaro Axle Parts

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Chassis

AAM Adds New Chevy Camaro Axle Parts

AAM, formerly known as American Axle & Manufacturing before a rebranding late last year, has announced the addition of new axle parts for 2010 and newer Chevy Camaro models. The new parts are available in three axle sizes: 195 mm rear axle 10 bolt, 218 mm rear axle 10 bolt and 250 mm ZLI rear axle bolt.

Brake and Front End Staff
By Brake and Front End Staff
Published:

Related Articles

AAM, formerly known as American Axle & Manufacturing before a rebranding late last year, has announced the addition of new axle parts for 2010 and newer Chevy Camaro models. The new parts are available in three axle sizes: 195 mm rear axle 10 bolt, 218 mm rear axle 10 bolt and 250 mm ZLI rear axle bolt.

AAM Chevy Camaro axle parts include gear sets, bearing kits, output seal kits, pinion seal, installation kits and TracRite PC traction enhancing differentials.

AAM displayed its new line of Camaro axle parts along with its complete selection of axle and drivetrain components at the 2013 SEMA Show in Las Vegas last month.

For more information, visit www.demandaam.com.

 

You May Also Like

Chassis

Curing Shock, Strut and Suspension Noise

As vehicles age, eliminating noise is Job 1. But ‘noise’ may mean different things to you and your customers.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Brake & Front End magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers. He can be reached at [email protected].
Published:

Shocks, struts and springs are the connection between sprung and un-sprung parts of the vehicle. The design is simple, with just a piston traveling in a cylinder full of oil to control the travel of the suspension and movement of the body during weight transfer. If the engineer gets it right, the valves in the piston and base of the shock or strut will be able to keep the tires in contact with the road and the body level under a wide variety of conditions. Unfortunately, the suspension can be damaged, and the shocks and struts will degrade. This can lead to handling issues and noise problems.

Read Full Article

More Chassis Posts
Pricing Alignments

Why ordering off the menu can hurt your shop and customers.

By Andrew Markel
Toe Angles and Ride Height 

Zero toe angle is present when both tires are parallel to the center thrustline.

By Andrew Markel
High-End Ride Control Rehab

Electronically adjustable shocks and struts use conventional mono-tube and twin-tube oil-filled dampeners.

By Andrew Markel
Toe Angles and Tie Rods

It is critical to remember that toe is not always zero or straight ahead.

By Andrew Markel

Other Posts

BCA Bearings Unveils 2024 Endless Summer Promotion

The Endless Summer promotion runs from May 1 through June 30, 2024.

By Nadine Battah
PRT Launches 30 New Complete Strut Assemblies

The new items represent more than 10 million vehicles in new coverage, PRT said.

By Nadine Battah
RNR Tire Express Hosts Mother’s Day Giveaway

The eighth-annual event promises $100,000 in prizes, as well as a brand new 2024 Buick Encore for one select nominee.

By Brake and Front End Staff
Brand Refresh for Tires Plus, Hibdon Tires Plus Begins

Logo updates include a single-color tire mark; a logo palette comprised of Tires Plus yellow, black and red; and refined typefaces.

By Brake and Front End Staff