Tech Tip: The Hybrid Compressor - Know The Difference

Tech Tip: The Hybrid Compressor – Know The Difference

HVAC systems differ from one hybrid to the next, and some systems have used a scroll compressor, which can be powered via a belt when the engine is running, or electrically when the engine is off. Most of the newer hybrids have changed to an inverter compressor, which is a high-voltage electrical motor.

HVAC systems differ from one hybrid to the next, and some systems, such as those on Honda and Toyota Prius 2001-’03 models, have used a scroll compressor, which can be powered via a belt when the engine is running, or electrically when the engine is off. Most of the newer hybrids have changed to an inverter compressor, which is a high-voltage electrical motor. The motor runs on high-voltage AC supplied by the A/C inverter ­located in the inverter or affixed to the A/C compressor itself, so compressor operation does not depend on the engine.

The electric compressor consists of a spirally wound fixed scroll and variable scroll with a brushless motor. These systems use a special high insulation for compressor lubrication. The compressors are a wet sump type with the armature submerged in oil for lubrication and cooling. Oil-based florescent dye should not be added to electrical compressor systems due to electrical conductivity.

Leak detection dye, when used in the proper quantity, will not harm air conditioning components or those working with it. If a vehicle was manufactured with leak detection dye, adding more is not necessary, unless prior air conditioning system flushing or multiple refrigerant ­component replacement caused the dye to be removed from the system.

 

Leak Detection Dye

There is a specific dye for hybrid electric vehicles that use R-134a in the air conditioning system equipped with an electric compressor. Hybrid electric vehicle leak detection dye is polyolester based and is specific to hybrid electric vehicles.

The R-134a leak dye used for non-hybrid electric vehicles uses PAG oil, which is hygroscopic. Using it in a hybrid vehicle, even in the smallest amount, can create an air conditioning compressor failure. The oil in the dye breaks down the insulating properties of the windings on the electric motor portion of the compressor. These windings are immersed in compressor oil, and ester oil is used to protect the insulation on the windings to prevent electrical leakage. The addition of PAG oil into a hybrid air ­conditioning system designed for ester oil may result in an air conditioning ­system malfunction.

Additionally, in hybrid vehicles with an electric compressor, when a dye containing a lubricant other than ester oil is added to the air conditioning system, it contaminates the air conditioning system. Flushing the system must be performed to remove the dye. In fact, because of the contamination concern with dye, Honda does not approve its use in hybrid vehicles. Toyota does not recommend dye for any of its air conditioning systems.

 

Hybrid Compressor Do’s and Don’ts

Do’s:

• Do use PAG 46 oil or equivalent on first-­generation 2001-’03 Prius.

• Do use PAG 46 oil or equivalent on 2000-’06 Insight and 2005 Civic.

• Do always refer to manufacturers’ recommendations when servicing A/C systems.

• Do shut down high-voltage battery power when servicing any high-voltage A/C compressor.

Dont’s:

• Do not use any compressor oil other than ND-11 or equivalent on Toyotas.

• Do not use PAG oil on vehicles with HV compressors.

• Do not use any compressor oil other than ­SE-10Y or equivalent on Hondas.

• Do not use any compressor oil other than what’s recommended by the manufacturer.

• Do not use safety or test equipment on high-voltage systems unless they’re tested or certified for use on high-voltage systems.

• Do not flush high-voltage systems.

Courtesy of Delphi Product & Service Solutions.

You May Also Like

Standard Motor Products Announces 123 New Numbers

The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

Standard Motor Products, Inc. (SMP) announced the introduction of 123 new part numbers in its March new number announcement. The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

Internal Combustion Engine (ICE) Segment

Standard’s Fuel Injection program has expanded with eight GDI High-Pressure Fuel Pumps and GDI High-Pressure Fuel Pump Kits. Standard’s line of Variable Valve Timing components also grows with this release. VVT Sprockets have been added for Ford vehicles through 2023, and VVT Solenoids are new for General Motors vehicles. Oil Filter Housing Assemblies are new for popular European vehicles, and Oil Coolers have been added for Nissan and Subaru vehicles. Adding to Standard’s extensive Electronic Throttle Body program, new numbers have been introduced for the 2022 Ford Bronco Sport and 2022-20 Ford Escape, the company said.

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to their study plans.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Auto Care Association Launches REPAIR Act Video

The goal is to emphasize the need for federal REPAIR Act legislation, according to the Auto Care Association.

Other Posts

Valvoline Celebrates Female Service Center Employees

Valvoline is launching a social media campaign led by its female experts who are sharing automotive preventive maintenance tips to promote accessible vehicle care for all.

ASE Education Foundation, Goodguys Continue Partnership

Goodguys is one of many industry relationships the foundation has developed to help solve the technician shortage.

BorgWarner Announces Plan to Reduce Supply Chain Emissions

A partnership with Manufacture 2030 will support BorgWarner in reaching its Scope 3 emissions reduction goal.

Mevotech Releases 237 New Chassis, Control Arm, Wheel End Parts

The release boosts coverage for domestic and import passenger vehicles, pickup trucks, SUVs and EVs up to model year 2023.