VIDEO: Keys To Evaluating Your Labor Rate

VIDEO: Keys To Evaluating Your Labor Rate

Set your labor rate correctly to draw top talent, too. This video is sponsored by Auto Value and Bumper to Bumper.

Many shop owners take the position that the best way to set your labor rate is to survey your competition, determine the top and bottom labor rate, and then set theirs in the middle. Conventional wisdom says that if I am not the highest or the lowest then the customer is more than likely going to choose the shop in the middle.

While this might be good for Goldilocks, it’s hardly an effective way to approach one of the most critical aspects of running a profitable shop. Setting your labor rate at the correct level keeps you profitable and allows you to draw exceptional talent.

Avoid the deadly middle

Consider a few shopping experiences. One store, a leader in luxury retail, sets their prices for goods typically 25% higher than you can purchase from other retail outlets. The quality of the merchandise is exceptional but the service exceeds the expectations of the pickiest customers.

Another chain, whose former motto was “Always Low Prices” focuses on the value shopper. When you go there you know the quality might not be the best along with the level of service you would receive.

Each retailer occupies its respective space which, based on their business model, allows them to operate a profitable enterprise.  While one caters to customers that appreciate quality and service ahead of price; the other draws the value-conscious buyer.

The space left in between is the area I call “the deadly middle.” Buyers are drawn to inexpensive or high quality. So be careful when setting your labor rate as it compares to the rest of your market. Does your labor rate say, we’re not good enough to charge the most or come to us because we’ll save you money?

Quality Staff

Hiring and retaining quality staff is critical to a successful shop. While culture and identity are several reasons employees work at your shop, compensation is what they put in the bank. Ensuring that your shop has a competitive labor rate will go a long way toward retaining top talent.

Examine your current pay plan

The industry benchmark for gross profit on labor is 72%. Your cost should be 28% of your collected labor dollars.

Performing a phone survey of the competition will help you to know where prices are trending. Be careful though…you should never discuss your labor rates and pricing with competitors. The federal government has strict laws against price-fixing as the consumer expects prices to be set independently and relevant to supply and demand.

See the webpage: www.ftc.gov/tips-advice/competition-guidance/guide-antitrust-laws/dealings-competitors/price-fixing

It’s not just the labor rate

Along with having a competitive labor rate, there is an additional item to consider, utilizing a labor multiplier. The labor “guide” is just that, a guide, that is meant to assist your shop in providing a fair estimate for the work required. There are many variables that are not taken into account when in the published “guide” time.

Such as:

  • Diagnosis
  • Rust
  • Extensive cleaning
  • Broken bolts
  • Deactivating and reactivating electronic systems
  • Wheel locks
  • And many more

The key to evaluating your labor rate is to find the balance between charging a fair price that allows your shop to remain competitive, retain and draw customers and at the same time provide a wage to your employees that allows your shop to be highly profitable.

Vic Tarasik has been an independent auto repair professional for more than three decades and is the former owner of Vic’s Precision Automotive in The Woodlands, Texas. He is the founder of Shop Owner Coach, a coaching and training organization that is committed to helping independent repair shop owners achieve their dreams through the intentional application of best business practices. Vic can be reached at [email protected] or by calling 832.205.8186.

This video is sponsored by Auto Value and Bumper To Bumper.

You May Also Like

Limited Slip Supplement (VIDEO)

If the frictional properties are not correct, chatter will occur. Sponsored by Lubegard.

Welcome to the Lubegard Limited Slip Supplement overview. Clutch-based limited slip differentials are common on many automotive applications like trucks and SUVs, but they present a unique problem. These differentials often use different clutch configurations, either cone or flat type, made with various materials and frictional requirements. When both wheels have ample traction, the clutch plates bind together tightly, sending consistent power to each wheel. When one wheel slips, additional power is sent to the other wheel based on the frictional properties of the clutch packs. This is where the gear lubricants frictional properties play an important role in functionality and performance.

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Nissan Around View ADAS Camera Calibration (VIDEO)

Always calibrate the around view monitor system after a collision.This video is sponsored by Hunter Engineering.

Collision Blueprinting with Alignment Equipment (VIDEO)

An alignment is usually called for prior to ADAS calibrations. This video is sponsored by Hunter Engineering.

Other Posts

ADAS Calibrations: Accessing the FCA/Stellantis Secure gateway

The secure gateway ensures no procedures are performed without the proper data. Sponsored by Hunter Engineering.

Ford F-250 Shock Replacement (VIDEO)

Follow along the step by step installation process of shocks on a Ford F-250. This video is sponsored by PRT.

2007-2021 Toyota Tundra Strut Replacement (VIDEO)

Follow along the step by step installation process for struts on 2007-2021 Toyota Tundra’s. This video is sponsored by PRT.

AMN Drivetime: MEMA Leaders Chat About The Future

MEMA leaders sat down with Bill Babcox to share a few updates on the realignment of the association announced in November.