Boosted!
Disc brakes are not “self-energizing” like drum brakes, so they require more pedal effort to apply. It’s the magic of power brakes that allows a 98-lb. little old lady to bring two tons of Lincoln Town Car to a screeching halt with little more than a light caress of her foot against the brake pedal.
Mitchell 1 Updates ASE Test Preparation Guide
In preparation for the fall ASE exams, Mitchell 1 recently announced that its L1 Advanced Engine Performance Specialist guide has been updated to include the latest composite vehicle (Type 3) configuration, which represents a generic vehicle powertrain control system according to ASE.
Tech Tip: Are You Testing Your Customers’ Brake Fluid?
When was the last time you tested a customer’s brake fluid? Never? Many shops don’t bother to test brake fluid for several reasons. Some don’t think fluid tests are necessary. Others don’t test the fluid because they don’t have anything to test it with. And others say why bother if they’re going to bleed the brakes after relining the brakes?
Brake Fluid Testing, Bleeding & Flushing
Brake fluid is something that should always be changed when the brakes are relined or when replacing a caliper, wheel cylinder, brake line, hose or master cylinder. But what about other times? Should brake fluid be replaced for preventive maintenance? Most brake experts say yes! DOT 3 and DOT 4 brake fluid contains glycol ethers
BMW Maintenance: The Right Equipment and Information Make Service Profitable
Well-designed and durable, the cars from Bavaria have had a reputation for handling and performance that many other manufacturers only aspire to. In the last 50 years, BMWs have gone from the three-wheeled Isetta microcar of the 1950s to today’s powerful and comfortable high-performance machines with all of the latest technology. One of my favorite
Diagnostic Solutions: Wheel Bearing Diagnosis
PROPER PROCEDURES AND CORRECT TOOLS PREVENT COMEBACKS Although wheel bearings are often the most neglected part of the vehicle, they nevertheless have a critical job to do, and in most cases, do it very well. Not only are wheel bearings designed to support the weight of the vehicle and allow it to travel over a
Are You Testing Brake Fluid for Customers?
When was the last time you tested a customer’s brake fluid? Never? Many shops don’t bother to test brake fluid for several reasons. Some don’t think fluid tests are necessary. Others don’t test the fluid because they don’t have anything to test it with. And others say why bother if they’re going to bleed the
Tech Tip: Spotting Problems with a Non-Contact Infrared Thermometer
Being able to measure temperature variances can play an important roll in diagnosing vehicle maladies for both undercar and underhood technicians. This can be easily accomplished by using a non-contact infrared thermometer. With this tool, technicians simply point the thermometer at the area of concern and they are immediately provided with the temperature of the surface in question.
Alignment Equipment
From the brake pad to the shock absorber, every product that you come in contact with at a shop has a history that goes back at least 75 years. We will look at different product categories and track the innovations that have shaped these products and the future for these segments. Alignment Retrospective In the
Odds & Ends:
The Return of the Mustang Pedal Car It wasn’t long after Henry Ford began mass-producing Model Ts at the turn of the century that kids took to sidewalks in miniature pedal cars. The steel-covered toys remained high on children’s wish-lists until the ’70s when the company stopped producing them. Just as the 1965 Mustang was