Tech Feature: Brake Job on Ford CVPI
The Ford Crown Vic Police Interceptor, or CVPI, has been around since 1992. The current crop of CVPIs do not differ much mechanically from their predecessors, but on the undercar electronics, the vehicle has advanced dramatically in the past 10 years.
Brake Job: 2007 GM Full-Sized 1500 Pick-Up and SUV
The GMT 900 debuted in 2007 as the replacement for the GMT 800. The first GMT 900 vehicle was the Chevrolet Tahoe, which arrived at dealers in January 2006. The GMC Yukon (regular and Denali) and Cadillac Escalade soon followed. Chevrolet Avalanches and Suburbans, GMC Yukon XLs, and Cadillac Escalade ESV and EXT were next to hit the roads.
Tech Feature: Brake Job on Chrysler Sebring
The Sebring was replaced with a new model based on the JS platform for the 2007 model year. There are several brake packages available featuring either a disc/drum combination or a disc/disc combination. All models are equipped with five possible brake system options.
BRAKE JOB: Bob on Brakes
Bob Dowie knows brakes. Dowie has been in the automotive service business for more than 30 years, and his shop, Village Auto Works in Chester, NY, specializes in Honda, Toyota, Mazda and Nissan repair. Dowie owns and runs a Honda Civic and Nissan Sentra SER in SCCA GT5 racing, and gets his technicians involved in various aspects of the sport. In this installment of BRAKE JOB, Bob shares some of his best tips for doing as complete brake job.
Tech Feature: Brake Job on Ford Edge
The Ford Edge is an SUV based on a the CD3 platform. The brakes on these vehicles are straightforward and do not break any new ground. The brake systems on all variants have disc brakes at all corners. There are no major changes to the brakes system from 2007 to 2009. For the 2008 model year, ABS became a standard feature, as did a direct tire pressure monitoring system. The worst brake component to service is the master cylinder. Getting to the unit requires removal of the trunking for the air intake, battery tray and other components.
Tech Feature: Brake Job on 2004-2008 Toyota Corolla
The 2004-2008 Toyota Corolla was one of the best selling vehicles in North America. The front brakes for all models are, for the most part, the same. The only changes came in the configuration of the brake pad shims. The Corolla was not subject to the unintended acceleration recalls for floor mats or gas pedal.
BRAKE JOB: Toyota Tundra Brake Caliper Upgrade
If a 2000-’05 Tundra or Sequoia comes into your shop with a complaint of brake pulsation, there are a few diagnostic steps that should first be taken before repairs are recommended.
The Bruising Brake Job
A retired lady, who had been in several times before, needed a brake job on her little Buick. I said sure, why not, I could do that for her. I put the car up on the lift, checked it out, and gave her an estimate.
BRAKE JOB: GM H-Body Brake Job
Pad and rotor replacement is straightforward on this vehicle. But, there are some common errors that can be made if you are not paying attention. First, make sure the front caliper bracket bolts are tightened to 137 ft/lbs. If the bolts work their way loose, the driver may experience a sporadic low pedal condition or worse. Second, replace the hardware if necessary. Most noise complaints can be traced to worn out hardware. Third, this vehicle is sensitive to thickness variation of the rotors. Always make sure thickness variation is below .0005”, or you could have a pulsation comeback.
Shop Profile: Quality Brake Jobs Cost More than $59.95
Lee Singer is the owner of Duke and Lee’s Service Station, a family-run automotive repair shop in Geneva, IL. One challenge he faces is educating customers about the cost of vehicle maintenance.