Complete Clutch Replacement: No Noise, No Comeback
Diagnosing clutch and manual transmission noise can be a difficult diagnosis. There is no way of attaching a scan tool or looking into the bellhousing while the clutch is under load. Clutch diagnostics requires logic and understanding of how the parts interact.
Torque And Runout: Measure Twice, Install Once
There are two critical measurements when installing a modern hub unit or cartridge bearing: torque and runout in the flange. Ignoring these critical numbers to save time will only lead to more comebacks and angry customers.
BRAKELIGHT: 1930s and 1940s
BRAKE & FRONT END cartoons from the 1930s and 1950s The cars may have changed, but the humor stays the same.
Port of Opportunity
I was recently at a big-box electronics store and I saw a variety of OBD-II devices that are designed to track drivers, diagnose check engine lights and even perform remote starting. As a gadget geek, I was drawn into slick packaging and promises of a better life through technology. There was also another voice inside
Subaru Alignment Spec: 2005-2009 Legacy
If you look at online forums about Subaru alignment problems, you will quickly realize the problem is often not with the vehicle, but the driver. The most likely condition requiring Subaru repair is a lack of communication between the shop or dealer and the owner.
What Causes Binding in the Steering System After Rack Replacement?
Binding in steering system, poor returnability, noise, no assist to either or both sides of vehicle, vibration or leaks.
