New Car Dealer Closings Is it a silver lining or a forecast for part supply problems?

New Car Dealer Closings Is it a silver lining or a forecast for part supply problems?

There has been recent celebrations by some in the aftermarket over the closings of General Motors and Chrysler dealers. But, they really need to step back and realize the true implications of these closings to shops. Many shops are starting to notice some of their new car dealer part sources answering their phones “(insert dealer’s name) used cars.” Even at dealerships not slated to close, inventories are not too deep and it is becoming difficult for them to find parts in “the system.” For small- to medium-sized towns that have lost or are losing dealers, it is big deal to shops. They have lost a vital parts source needed to keep their customers on the road and their shops profitable

Recently, I talked to a shop owner in a small town in west Texas who lost its local Dodge dealer. He was installing a new hydroboost unit on a 1999 Dodge Ram truck and could not figure out which way a clip should go. He said he would usually call his “buddy” in the parts department and they would look at the parts books and help him or tell him where to look on the Chrysler repair information website.
He said that his shop spent around $7,000 last year with the dealer. Now the closest dealer was 200 miles away and he does not have a “buddy” in the parts department.
You maybe asking why I am  shedding a tear for the dealer? Are they not our biggest source of competition? I am not saying their lose is not our gain, but shops have lost a vital parts source they needed keep customers on the road — parts local jobbers and warehouse should start thinking about stocking.
Some parts suppliers focused on “fast moving” parts like filters, brake pads and water pumps seemed the happiest at some dealers’ downfall. Unknowingly, they are one of the greatest  supporters of new car dealers by training their counter staff to say “you are going to have to go to the dealer for that.” The reality is lines of those parts are offered by the aftermarket, it is just that they choose not to stock them. They will probably not be getting any of the $7,000 in annual parts sales from the west Texas shop.
Part of the problem is many warehouses and jobbers do not want to stock a “slow moving” line with many part numbers that might take up shelving space or count against them on their balance sheets. Also, with the current credit market crisis, many smaller warehouses and jobbers can not get loans or credit with the manufacturer to stock an inventory.
But, shops and drivers need “slow moving” parts yesterday. The longer a shop has to wait for  parts, is time a vehicle may be clogging up a bay. In my opinion, the current parts supply chain and shops can not take too many more new car dealership parts department closings. I am already hearing stories of shops waiting on parts for days, and consumers complaining not having a car or driving their car in a less than optimal condition.
I have gone to the AAPEX show in Las Vegas  for the past eight years. It is amazing to see what  manufacturers are making that were previously “dealer only” exclusive. I have seen complete lines of wheel speed sensors, ABS modulators and air ride struts. Some exhibitors are even the original equipment supplier, looking to get into the lucrative aftermarket.
Everybody is looking for the signs of an economic recovery. Some people in our industry saw the announcements of new car dealerships closing as a cloud with a silver lining. But, before parts suppliers remove their rain coats and go out to jump in puddles, they need to look at how the loss of new car dealer parts departments impacts their customers, the shops. There is an opportunity here for jobbers and warehouses to keep their customers healthy and buying parts, but they have to be willing to take a chance on stocking some lines.

You May Also Like

Choosing the Right Power Steering Fluid

Learn what power steering fluid is, why it’s crucial for your customers vehicle, and how to choose the right type.

So what is power steering fluid? Power steering fluid is hydraulic oil for the most part, with certain additives that are tuned for the automotive applications, but it is hydraulic fluid. In other words, you have a pump that creates pressure and that force is changed into energy at a steering rack by turning the wheels or extending the tie rods in either direction. What else is hydraulic on the vehicle? The automatic transmission. This is why some vehicles will actually specify transmission fluid to be used inside the power steering system, but there are exceptions. Certain vehicles out there, mostly Asian, have their own formulation of power steering fluid. So it is absolutely critical that you match the power steering fluid with the application. Some may use a different weight of oil, and if you use the wrong power steering fluid, it can change the feel of the steering, but most of all, it can damage the pump and the rack on the vehicle.

Dana Releases Rear Semi-Float Axles for Jeeps 

The axles provide Jeep owners with a direct-fit, bolt-in upgrade solution that is built for superior strength inside and out, the company said.

Global EV Sales Expected to Increase by 21% in 2024

This represents a significant decline from growth rates of 31% in 2023 and 60% in 2022, ABI Research said.

Akebono Expands Severe Duty Disc Brake Pad Kits

Akebono said it expanded its severe-duty ultra-premium disc brake pad line by 14 new part numbers.

GSP Releases New CV Axle Part Numbers

GSP said 14 new CV axle part numbers are in stock and ready to ship.

Other Posts

Wheel Bearing Service

When faced with any noise complaint, take the time to test-drive the car with the customer, if that’s possible.

Replacing Your Power Steering Reservoir

Discover why simply flushing out contaminants from power steering reservoirs may not be sufficient to prevent potential failures.

Mullen Announces New CARB Certification

The certification is awarded to vehicle manufacturers who meet specific emissions standards in compliance with CARB regulations.

Schaeffler Group USA Expands Product Portfolio

Seventy new parts have been added to the INA, LuK and Schaeffler Bearings portfolios in the first quarter of 2024.