Mac Tools Introduces the Medium Wave Infrared Curing Lamp

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Post

Mac Tools Introduces the Medium Wave Infrared Curing Lamp

Mac Tools introduces the new Medium Wave Infrared Curing Lamp - PCM100S. Ideal for small area repairs, this 120 volt lamp emits 1500 watts of curing power over a 2' X 3' coverage area. Weighing 24 lbs., this lamp has a heavy-duty stand that adjusts to over 6' high for curing hoods and roof lines.

Brake and Front End Staff
By Brake and Front End Staff
Published:

Mac Tools introduces the new Medium Wave Infrared Curing Lamp – PCM100S. Ideal for small area repairs, this 120 volt lamp emits 1500 watts of curing power over a 2’ X 3’ coverage area. Weighing 24 lbs., this lamp has a heavy-duty stand that adjusts to over 6’ high for curing hoods and roof lines.

Related Articles

Boasting a parabolic reflector for uniform heat distribution, this lamp is energy efficient costing only pennies per hour to operate!

To order the Mac Tools Medium Wave Infrared Curing Lamp – PCM100S, contact your local Mac Tools distributor or call 1-800-MACTOOLS.

For more information, please visit www.mactools.com.

You May Also Like

Chassis

Toe Angles and Ride Height 

Zero toe angle is present when both tires are parallel to the center thrustline.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Brake & Front End magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers. He can be reached at [email protected].
Published:

How can a mysterious case of tire wear occur in a perfectly aligned vehicle? It happens and the answers aren’t always simple. To better explain, let’s go back a few decades when I aligned a 1983 Mitsubishi RWD pickup, only to have it return a month later with a tire scuffing complaint. Although the outside edge of the right front tire showed evidence of toe-related wear, the current toe angle was 0.100 inches, which is within the Mitsubishi’s +0.080” to +0.350“ specification.

Read Full Article

More Posts
Sona Comstar Inaugurates Manufacturing Plant in Mexico

The new facility will specialize in producing differential assemblies and reduction gears meticulously designed for BEVs.

By Brake and Front End Staff
Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

By Andrew Markel
What Constitutes A Quality Wheel Hub Assembly?

Discover key factors to consider for quality hub assemblies and how they impact vehicle performance and longevity.

By Doug Kaufman
Needs Come First When Choosing Aftermarket Or OE

It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.

By Doug Kaufman

Other Posts

Service Opportunities Still Exist With EVs

Like all ICE vehicles, you need the correct tools, parts and to follow the proper service procedures when servicing EVs. This video is sponsored by The Group Training Academy.

By Doug Kaufman
Do Technicians Need Tips?

Asking for a tip would not go over well with your future customers.

By Andrew Markel
Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

By Andrew Markel
Green Li-ion Launches Lithium-Ion Battery Materials Plant

The plant is North America’s first commercial-scale plant to produce recycled lithium-ion engineered battery materials.

By Brake and Front End Staff