Tech Tip: How Motor Oil Helps Keep Engines Running Clean

Tech Tip: How Motor Oil Helps Keep Engines Running Clean

As anyone who has even a small amount of experience working on engines knows, regular oil changes are one of the most important things that can be done to extend the life of an engine. Premium-quality motor oil will maintain its effectiveness over the life of the oil drain, allowing it to help keep the engine clean.

As anyone who has even a small amount of experience working on engines knows, regular oil changes are one of the most important things that can be done to extend the life of an engine. Premium-quality motor oil will maintain its effectiveness over the life of the oil drain, allowing it to help keep the engine clean.

Additive packages are added to motor oil and play a key role in helping to keep an engine clean and protected from varnish and sludge, as well as wear from heat and acids. Additives can consist of anti-wear agents, friction modifiers, dispersants, detergents, viscosity index improvers and antioxidants. Some key cleaning ingredients that make up motor oil additive packages are detailed below:

• Anti-wear additives lay down a protective, sacrificial film between moving parts and also help stop oxidation of the motor oil.

• Dispersants grab dirt and sludge before they can build up during engine operation, holding them in suspension and preventing them from depositing onto engine parts.

• Detergents help keep high-temperature surfaces such as pistons clean. Changing the motor oil at proper intervals will help to prevent ring sticking and piston deposits.

• Viscosity index improvers are chemical additives that are added to motor oil to ensure proper oil viscosity at extreme cold and hot operating conditions, enabling the development of multi-grade oils such as SAE 5W-20.

• Friction modifiers help to reduce friction in critical areas of the engine, thus enhancing the vehicle’s fuel economy.

• Anti-oxidants stop oil oxidation to help keep the oil from becoming too thick.

Properly functioning engine oils help enhance fuel economy, prevent sludge and varnish deposits, and maintain proper low-temperature pumpability. The additives in engine oils are consumed during use at different rates, which vary with vehicle, engine type and driving conditions; therefore, it’s not possible to establish a universal oil drain interval. Always follow the recommended oil drain interval and oil specifications found in the owner’s manual.

Courtesy of Pennzoil.

For additional information on products offered by Pennzoil, visit www.pennzoil.com.

You May Also Like

Choosing the Right Power Steering Fluid

Learn what power steering fluid is, why it’s crucial for your customers vehicle, and how to choose the right type.

So what is power steering fluid? Power steering fluid is hydraulic oil for the most part, with certain additives that are tuned for the automotive applications, but it is hydraulic fluid. In other words, you have a pump that creates pressure and that force is changed into energy at a steering rack by turning the wheels or extending the tie rods in either direction. What else is hydraulic on the vehicle? The automatic transmission. This is why some vehicles will actually specify transmission fluid to be used inside the power steering system, but there are exceptions. Certain vehicles out there, mostly Asian, have their own formulation of power steering fluid. So it is absolutely critical that you match the power steering fluid with the application. Some may use a different weight of oil, and if you use the wrong power steering fluid, it can change the feel of the steering, but most of all, it can damage the pump and the rack on the vehicle.

Dana Releases Rear Semi-Float Axles for Jeeps 

The axles provide Jeep owners with a direct-fit, bolt-in upgrade solution that is built for superior strength inside and out, the company said.

Global EV Sales Expected to Increase by 21% in 2024

This represents a significant decline from growth rates of 31% in 2023 and 60% in 2022, ABI Research said.

Akebono Expands Severe Duty Disc Brake Pad Kits

Akebono said it expanded its severe-duty ultra-premium disc brake pad line by 14 new part numbers.

GSP Releases New CV Axle Part Numbers

GSP said 14 new CV axle part numbers are in stock and ready to ship.

Other Posts

Wheel Bearing Service

When faced with any noise complaint, take the time to test-drive the car with the customer, if that’s possible.

Replacing Your Power Steering Reservoir

Discover why simply flushing out contaminants from power steering reservoirs may not be sufficient to prevent potential failures.

Mullen Announces New CARB Certification

The certification is awarded to vehicle manufacturers who meet specific emissions standards in compliance with CARB regulations.

Schaeffler Group USA Expands Product Portfolio

Seventy new parts have been added to the INA, LuK and Schaeffler Bearings portfolios in the first quarter of 2024.