GM Tech Tip: Growl Noise Caused By Axle Nuts

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Chassis

GM Tech Tip: Growl Noise Caused By Axle Nuts

To diagnosis the noise, re-torque the existing front axle shaft nut to 162 ft/lbs and test drive the vehicle. If the noise is eliminated, replace both front axle nuts with the updated part (P/N: 10257766). On vehicles equipped with the police package, add an additional Nord-Lock.

Brake and Front End Staff
By Brake and Front End Staff
Published:
Models: 
2006-2013 Chevrolet Impala
2014 Chevrolet Impala Limited
 
Problem: A driver may report that a growling noise is coming from the front of the vehicle. 
 
Cause: The condition may be caused by a loss of pre-load on the front wheel bearings due to the axle nut.
 
Correction: To diagnosis the noise, re-torque the existing front axle shaft nut to 162 ft/lbs and test drive the vehicle. If the noise is eliminated, replace both front axle nuts with the updated part (P/N: 10257766). On vehicles equipped with the police package, add an additional Nord-Lock. 
Related Articles

You May Also Like

News

Continental Tire Opens Retread Solutions Center in South Carolina

The company said it hopes to uncover new improvements and technologies to innovate the retread process.

Brake and Front End Staff
By Brake and Front End Staff
Published:

Continental Tire recently opened its Continental Retread Solutions Development Center in Rock Hill, S.C., with a focus on retread process improvements and technology development. The goal, Continental says, is to bring “innovation and up-to-date retread processes to Continental’s Retread Solutions Partners and the fleets they serve.”

Read Full Article

More Chassis Posts
High-End Ride Control Rehab

Electronically adjustable shocks and struts use conventional mono-tube and twin-tube oil-filled dampeners.

By Andrew Markel
Toe Angles and Tie Rods

It is critical to remember that toe is not always zero or straight ahead.

By Andrew Markel
ADAS Module Programming

Reflashing and reprogramming is a necessary service for repairing vehicles.

By Andrew Markel
Live Axle Wheel Bearing Service

Replacing rear wheel bearings on a live axle rear suspension requires a few extra steps when compared to a unitized bearing.

By Andrew Markel

Other Posts

Needs Come First When Choosing Aftermarket Or OE

It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.

By Doug Kaufman
Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

By Andrew Markel
Sun Auto Tire & Service Expands Texas Store Count

The company has acquired Carrollton Complete Automotive, which offers a range of automotive services.

By Brake and Front End Staff
Philips Announces GoPure GP5212 Automotive Air Purifier

It uses a 3-layer filter to deliver cleaner, healthier, fresher air on the go, Lumileds said.

By Brake and Front End Staff