Wheel Bearing Tips And Tricks (VIDEO)

Wheel Bearing Tips And Tricks (VIDEO)

Here are some tips to follow when replacing a wheel bearing. This video is sponsored by Auto Value and Bumper to Bumper.

In this video we answer the following questions about wheel bearings:

-Where do I place a stethoscope when listening for a bad bearing?

-What part should be removed first when replacing a wheel bearing?

-In what direction should the bearing be mounted in the knuckle? 

This video is sponsored by Auto Value and Bumper to Bumper.

You May Also Like

Instant Shudder Fix (VIDEO)

It can be hard to determine if your shudder is a fluid-related issue or a costly mechanical problem. Sponsored by Lubegard.

Welcome to how to apply Instant Shudder Fixx by LubeGard, the number one shudder solution used and trusted by professionals. LubeGard's Instant Shudder Fixx is a concentrated friction modifier formulated specifically for eliminating torque converter or TCC shudder in automatic transmissions.

As automatic transmissions age, the lockup torque converter's ability to transfer torque smoothly can decline, and additive packages in automatic transmission fluids can deplete, resulting in torque converter clutch shudder. TCC shudder can also occur in brand-new automatic transmission fluids.

Limited Slip Supplement (VIDEO)

If the frictional properties are not correct, chatter will occur. Sponsored by Lubegard.

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Nissan Around View ADAS Camera Calibration (VIDEO)

Always calibrate the around view monitor system after a collision.This video is sponsored by Hunter Engineering.

Other Posts

Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

Advanced Wheel Bearing Diagnostics

Can a bump set a wheel speed sensor code?

Collision Blueprinting with Alignment Equipment (VIDEO)

An alignment is usually called for prior to ADAS calibrations. This video is sponsored by Hunter Engineering.

BMW Wheel Bearings

Two technologies are being used that are allowing engineers to put better bearings in smaller packages.