Water Pumps: Why They Fail and When to Replace Them

Water Pumps: Why They Fail and When to Replace Them

If you’ve wondered how much work a water pump must do, remember that only about 30 percent of the heat energy produced by combustion results in mechanical energy. That estimate, of course, is a mathematical comparison between the heat value of the gasoline going into the engine, and the heat value of the mechanical energy coming out of the engine. The remainder of combustion heat must then be dissipated into the atmosphere through the exhaust, lubrication and cooling systems.

Water pump operation is important because, if the coolant’s circulation rate is too slow, the coolant will begin to boil in the engine’s water jackets. Unfortunately, when coolant boils, it becomes gaseous and can no longer cool hot cylinder walls and cylinder heads. The result is overheating, which is a primary cause of catastrophic engine failure.

To prevent the coolant from overheating, a water pump is used to circulate the coolant through the engine’s cylinder block, heads and radiator. As it circulates, the coolant absorbs heat from the engine block and dissipates it into the atmosphere through the radiator.

Of course, coolant temperatures may vary according to ambient temperature, engine load and engine speed. The modern import engine must operate between 185

You May Also Like

Bosch Releases 87 New Part Numbers in June

Bosch’s new part numbers cover 318 million vehicles in operation across North America.

Robert Bosch, LLC announced it has added 87 automotive aftermarket parts to its portfolio in June 2024, covering nearly 318 million vehicles in operation across North America. The new part numbers – which cover Domestic, European and Asian passenger and commercial vehicles – include 22 wiper part numbers, 35 rotating machines, 20 sensors, six spark plugs and more, according to the company.

Driveshaft, Axle and Drivetrain Noise FAQs

Follow along to learn more about these unwanted noises.

Driveshaft Diagnostics

The big challenge with late-model vehicles is the diversity of driveshafts. 

Nissan CVT Clutch Point Relearn Procedure

The Adaptive Shift Control delivers responsive and powerful acceleration.

Diagnostic Test Drive For Drivetrain

A driveshaft center bearing can fail due to the bearing and the rubber isolator.

Other Posts
Schaeffler Recognized as a GM 2023 Top Global Supplier

This is the fourth time Schaeffler has been honored with this award.

Schaeffler, ATSG Partner to Support Technical Education

Schaeffler will provide ATSG members with ongoing education and technical resources.

MEYLE Expands Electronics, Sensor Product Portfolio

The focus is on assistance systems and engine and transmission management, with more than 300 new part numbers.

FCS Introduces 42 New Numbers in May

Complete strut assemblies, shock absorbers, shock absorber assembly kits and suspension struts for popular VIO applications are included.