Volkswagen Tech Tip: AG4 Slips on 2nd to 3rd Gear Shifts

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Brake and Front End Magazine
Technical Resources for diagnosing and servicing undercar components
Post

Volkswagen Tech Tip: AG4 Slips on 2nd to 3rd Gear Shifts

A 1999-2002 model with a 2.8L VR6 engine may experience transmission slips and then shift hard into gear during the 2nd to 3rd shift. The cause may be the Transmission Control Module (TCM) software. If the transmission diagnosis does not indicate repairs are necessary ....

Brake and Front End Staff
By Brake and Front End Staff
Published:

A 1999-2002 model with a 2.8L VR6 engine may experience transmission slips and then shift hard into gear during the 2nd to 3rd shift. The cause may be the Transmission Control Module (TCM) software.

Related Articles

Service Procedure:
1. If the transmission diagnosis does not indicate repairs are necessary, install new TCM P/N 01M 927 733 MP (software level 5060).

Note: The “MP” suffix part supersedes P/N 01M 927 733 with suffix-DJ, JS, KR, MB and MH.

2. After TCM replacement, using the VAS 5051 or VAS 5052, check and erase any DTCs and set basic settings.

Courtesy of IDENTIFIX.

For more information, visit www.identifix.com.

You May Also Like

Video

Needs Come First When Choosing Aftermarket Or OE

It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.

Doug Kaufman
By Doug Kaufman
Doug Kaufman has been with Babcox Media since 1987 serving in a variety of editorial and publishing roles and titles. He is currently editorial director of Brake & Front End, ImportCar, Tomorrow's Technician and Underhood Service. Doug has a Bachelor of Science in Journalism from Bowling Green State University and remains a committed MAC enthusiast.
Published:

When it comes to replacement suspension parts are OE parts necessarily superior to the aftermarket offerings? In shops all over the country the debate rages. Which side of the argument do you fall?

In the realm of replacement suspension parts, the battle between OEM and aftermarket options rages on. Each side champions its own virtues, leaving consumers and technicians to ponder which route to take.

Read Full Article

More Posts
Service Opportunities Still Exist With EVs

Like all ICE vehicles, you need the correct tools, parts and to follow the proper service procedures when servicing EVs. This video is sponsored by The Group Training Academy.

By Doug Kaufman
Do Technicians Need Tips?

Asking for a tip would not go over well with your future customers.

By Andrew Markel
Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

By Andrew Markel
Green Li-ion Launches Lithium-Ion Battery Materials Plant

The plant is North America’s first commercial-scale plant to produce recycled lithium-ion engineered battery materials.

By Brake and Front End Staff

Other Posts

FCS Introduces 16 New Numbers

The new numbers cover some of the most popular applications on the road today, including the Jeep Compass, Lexus GX470, Mazda 3 and more.

By Nadine Battah
Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

By Joe Keene
Gen 1 Wheel Bearings

Removing and installing these bearings requires the correct tools and patience.

By Andrew Markel
Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

By Brake and Front End Staff