VIDEO: Wheel Bearing Inspection From Pothole Damage

VIDEO: Wheel Bearing Inspection From Pothole Damage

When a bearing hits a pothole, it actually causes a small indentation to one of the races. This video is sponsored by GMB.

What are the signs, a wheel bearing has been damaged by a pothole? And how do I inspect a seal on a wheel bearing hub unit?


To answer the first question. Well, when a bearing hits a pothole, it actually causes a small indentation to one of the races. Over time that small indentation, it causes the grease to have turbulence over that area. This is what’s known as a brinelling mark. It’s where something very hard makes a mark in that race over time as the bearings go over it.

Well, it churns up the grease and also that mark can become larger and larger. So over time, this causes noise. This could be three days, or three weeks, or even three months, down the road depending on the vehicle, but the leading symptom it’s going to be noise coming from the wheel barring.There may be no detectable change in in play, or play in any which direction of the wheel, but it’s going to be very, very, noisy.


As for the second question about how to inspect a seal on a hub unit. The most important thing to remember is that there should be no leaking grease on the seal, especially on a modern hub unit. That may be a gen two, gen one, or gen three. If the seal is leaking well, it’s a sign that the outside is coming into the bearing, because if the grease leaks out due to excess heat, which could be caused by brinelling inside of the bearing, it is a sign that the bearing has failed internally.

So any time you see any leaks, or any time you’re installing a wheel bearing, and the seal becomes dislodged from the outer race, the hub unit, or the wheel bearing needs to be replaced. This video is sponsored by GMB.

You May Also Like

Headlight Options

Many of your customers may be installing LED upgrades in their vehicles. Sponsored by The Group Training Academy.

Lighting options in today’s cars are more varied than they’ve ever been. For many reasons, traditional replaceable halogen bulbs are not the only things you may face in the service bay.

According to Philips, headlight bulbs begin to project significantly less light within two to three years of their initial usage, producing dimmer light outputs that compromise the safety of drivers and their passengers.

Headlights and Visibility

Headlights are continually evolving to keep up with safety and styling. Sponsored by The Group Training Academy.

Headlight Bulb Replacement

Don’t overlook the role lighting plays in keeping drivers and passengers safe. Sponsored by The Group Training Academy.

It’s Time to Nominate The 2023 School of the Year!

The School of the Year competition is a national contest that finds and names the best technician training school.

Performance Revolution CV Axles

Are you disappointed with the relatively short lifespan of many aftermarket CV boots? Sponsored by GSP Automotive Group.

Other Posts

Extended Travel CV Axles

Avoid potential CV axle failure when off-roading with Extended Travel CV Axles. This video is sponsored by TrakMotive.

Understanding Emissions

Modern EVAP systems are selective with how they vent vapors back into the engine. Sponsored by Standard.

Oil Filter Housing Kits 

It is common for the seals to fail and begin leaking oil around the base. This video is sponsored by Standard.

Ignition System Secrets Every Tech Should Know

Unlock the secrets behind ignition systems for superior technician skills. Sponsored by The Group Training Academy.