VIDEO: Belt Inspection

VIDEO: Belt Inspection

Noise is the first sign that more components than just the belt need attention. This video is sponsored by Continental.

When it comes to belt inspection, there are three questions you need to ask.

Is there noise?

What do the surfaces of the belt and pulleys look like?

Is the wear across the belt or in a specific area?

If you can confidently answer these questions, you can not only make the right call on the belt, but the entire belt drive system.

Noise is the first sign that more components than just the belt need attention. Listen to the belt before proceeding with the rest of the inspection. The first clue is a belt squeal heard during engine start-up. The second clue might be a belt squeal heard during parking maneuvers or during an alternator load test.

Appearance of the belt’s grooves and pulleys matter. Late-model belts should not crack or show signs of abuse in normal operation. The belt should wear uniformly. The OE-recommended service interval is based on this wear and not on signs of cracking. Once enough material is worn away from the grooves in the belt, the grooves on the pulley bottom out, and the belt is not able to grip the alternator, power steering pump or A/C compressor. This is why following replacement intervals and measuring rib depth, using a belt wear gauge, is critical to keeping the belt and system healthy. Abnormal wear like cracking, pilling and glazing on the grooved side of the belt is a sign there might not be a problem with the belt, but maybe with the idler pulleys, tensioner or and other connected devices such as an OAD. So, replacing just the belt does not solve the underlying problem.

Cracking and missing chunks on modern belts are usually signs of high under the hood temperatures. Slipping on the pulleys creates friction and heat. If oil or coolant comes in contact with the belt, the slipping can increase and cause even higher temperatures.

Look at the entire surface of the belt. If the abnormal wear is in only one area, it is a sign the belt was damaged during installation or an incident occurred where an object came between the belt and pulley.

If the pulleys are misaligned, wear will occur on one edge of the belt. The edge is one of the most sensitive areas on the belt because the structural fibers are exposed. Edge wear is typically caused by misalignment of the pulleys.

By listening for noise and inspecting the belt, you not only spot a worn belt, but other conditions that can cause the new belt to suffer the same fate!

This video is sponsored by Continental.

You May Also Like

New Rislone ‘DEF Crystal Clean’ Clears P20EE Codes

The product scrubs away crystal contaminants from the selective catalytic reduction systems of diesel cars, trucks and SUVs.

Rislone introduces DEF Crystal Clean™ Diesel DEF & SCR Emissions System Cleaner. The product scrubs away crystal contaminants from the selective catalytic reduction (SCR) systems of diesel cars, trucks, and SUVs.

Rislone DEF Crystal Clean dissolves crystal deposits throughout the entire SCR system, including the tank, pump, heater, sender, lines, injector, decomposition tube/reactor and mixer. It clears P20EE and related OBD codes and restores SCR function.

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

Understanding the OAD Pulley

Discover the ins and outs of OAD pulleys, their role in belt drive systems, and learn the tricks of diagnosis and replacement. This video is sponsored by Continental.

The Future of MEMA with Bill Long

MEMA looks to the future as it celebrates 120 years making a big impact.

Other Posts

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

How Important is Regenerative Braking For EVs?

Regenerative braking helps to increase the overall efficiency and range of the EV, increasing the range of an EV by up to 20%.

BEV Brake Service Tips

Andrew Markel shares his latest service tips in the all new BendPak EV Garage video series.

Get to Know Performance Ride Technology

PRT is a global OE supplier with more than 5,000 products available in the United States.