Beat The Heat With Cooling Fan Assemblies

Beat The Heat With Cooling Fan Assemblies

The quickest way to solve electric fan-related, engine-overheating issues is to replace the entire cooling fan assembly as a unit instead of trying to repair or replace the individual fan motor. You'll eliminate unnecessary steps, hassles and unbillable labor.

VDO Fan AssembliesThe quickest way to solve electric fan-related, engine-overheating issues is to replace the entire cooling fan assembly as a unit instead of trying to repair or replace the individual fan motor. You’ll eliminate unnecessary steps, hassles and unbillable labor.

Fan motor replacements can take almost twice as much time. You have to pull the assembly, remove the blade and replace the fan motor and then refit the fan assembly. Some assemblies use rivets that need to be drilled out. Some use special fasteners, which cannot be reused.

The biggest hassle is the plastic shroud, which after years of use and exposure to temperatures may be too brittle to handle the refit.

You can avoid guesswork and installation hassles with VDO cooling fan assemblies. Made to OE specs for vehicle-specific fit, form, function, and proper cooling airflow, they come ready to install with an exact OE fit connector and shroud. Most importantly, VDO Fan Assemblies feature an OE-style motor, which delivers long-term reliability and service life. For more info: vdo.com/usa.

Courtesy of VDO

You May Also Like

Brake Problems

Reducing brake drag on late-model vehicles is not accomplished by a single component; it takes a system.

Drivers and technicians rarely make the connection between fuel economy and brakes. Moving the pads back from the rotor by only 1mm can increase fuel economy by as much as three to five percent. For engineers, it is a huge gain that does not involve exotic materials or adding expensive components.

Ball Joint Wear

As the wear increases, play increases inside the joint. 

Clarios Formalizes Joint Development Agreement with Altris

Altris will develop sodium ion cells for low-voltage tech while Clarios will lead in battery management systems, software, and system integration for battery design.

Driveshaft Diagnostics

The big challenge with late-model vehicles is the diversity of driveshafts. 

AMN Drivetime: Cal Ganda’s Continental Journey

Ganda embodies servitude leadership, prioritizing team success and customer-centricity.

Other Posts

Eli Opens Reservations for its Micro-EV in the US

The new Eli ZERO represents a new category of high-tech, efficient and sustainable micro-EVs, according to Eli Electric Vehicles.

Replacing Master Cylinders

The most common problems that occur in the master cylinder are wear in the piston bore and piston seal failure.

MEYLE Expands Electronics, Sensor Product Portfolio

The focus is on assistance systems and engine and transmission management, with more than 300 new part numbers.

FCS Introduces 42 New Numbers in May

Complete strut assemblies, shock absorbers, shock absorber assembly kits and suspension struts for popular VIO applications are included.