Under Pressure: Piston Service For Light Truck Diesels

Under Pressure: Piston Service For Light Truck Diesels

The diesel engine market has been rapidly changing in recent years. Higher fuel prices and changes in emission regulations have brought about a whole new generation of clean diesel engines in both the light- and heavy-duty truck markets.

According to the Diesel Technology Forum (www.dieselforum.org), particulate emissions from new on-highway diesel engines have been reduced 83% since 1988. Nitrogen oxide (NOx) emissions are down 83% over the same time period. With the latest low sulfur diesel fuel and exhaust particulate traps, diesel emissions will be reduced up to 90%.

Because of their higher fuel efficiency (typically 20-40% better than a gasoline engine with the same displacement), diesel engines power most heavy-duty trucks, transit buses and emergency vehicles. Diesel engines also power most farm machinery as well as a majority of school buses and medium-duty trucks, and they are a popular option in many pickup trucks. But Volkswagen has been the only vehicle manufacturer to sell diesel-powered cars in the U.S. in recent years, and in 2007 they didn’t offer any because of changes in diesel emission regulations.

In Europe, where fuel prices are considerably higher than in the U.S., and emission regulations are more diesel-friendly, 50-60% of passenger cars are now powered by diesel engines. Many experts predict that the number of diesel-powered passenger cars in the U.S. will increase dramatically over the next few years as auto makers introduce a new generation of clean diesel-powered cars that meet the new emission rules — especially if fuel prices remain high. That means more diesel-engine rebuilding opportunities down the road.

The interest in diesel performance has also been growing. Bolt-on performance packages for diesel-powered pickup trucks can easily add 75-150 horsepower or more for everyday driving and towing. While pulling has been the traditional use for diesel-powered tractors and trucks, diesel-powered vehicles are now winning races and setting records in venues that have long been the exclusive realm of gasoline-powered engines.

A group called the Diesel Hot Rod Association (www.dhraonline.com) has been promoting diesel drag racing at various tracks around the country. Many of the diesel-powered Pro Street trucks at these events are running in the 9-second range at speeds in excess of 140 mph in the quarter mile. The fastest diesel pickup truck is currently a twin turbocharged 6.6L Duramax-powered Chevy S10 built by Gale Banks. Last October, the S10 set the record by covering the quarter mile in 8.21 seconds at 165 mph. We’re also seeing more diesel-powered rail dragsters with modified Cummins or Duramax engines.

The point is, there’s a lot of interest lately in making diesels go fast. Because of this, a number of aftermarket engine parts suppliers are looking at light truck diesels as a growth opportunity for new performance products (including pistons). And as new diesel performance parts become more available (and affordable), it will create new engine building opportunities for many of our readers.

The Diesel Difference
The most obvious difference between a gasoline-powered engine and a diesel is that a diesel has no spark plugs or ignition system. The fuel is ignited by the heat of compression alone. When a diesel piston goes down on its intake stroke, it only draws air into the cylinder. When the piston comes up on its compression stroke, the fuel is injected into a precombustion chamber or directly into the combustion chamber by a high pressure injector (1,500 psi to as much as 27,500 psi depending on the system). The injection pulse is actually a series of pulses timed to provide maximum power and lowest possible emissions. Residual heat in the cylinder from the last combustion cycle combined with heat generated by compression ignites the fuel.

For cold starting a diesel, some means of supplemental heat must be provided to ignite the fire. Most diesel engines have a glow plug in each cylinder, and some also have an electrically heated grid in the air intake to heat the incoming air. The glow plug system may remain on for several minutes after the engine starts to smooth out the idle and reduce emissions while the engine warms up.

Diesel Piston Design
The combustion chamber in most diesel engines is actually in the top of the piston rather than the cylinder head. There is a bowl-shaped recess that swirls and compresses the air as the piston comes up. This design means the piston will be relatively long and heavy compared to a piston in a gasoline engine. On some light truck diesel engines, the pistons weigh 1,000-1,200 grams with a 300-400 gram wrist pin. But the extra weight doesn’t matter much because a stock diesel engine typically operates at relatively low rpm (under 4,000 rpm).

However, weight can become a problem if the engine is being modified and revved to higher speeds, say 5,000-6,000 rpm. At higher speeds, the weight of the piston on the upstroke creates a lot of momentum and load on the small end of the rod, the wrist pin and the wrist pin eyelets in the piston. The design of the wrist pin is usually optimized to spread load over the largest possible area on the downstroke, so the wrist pin opening in the small end of the connecting rod is usually tapered toward the top to create more bearing area on the underside of the wrist pin. Likewise, the wrist pin openings in the piston also taper in toward the center to create more bearing area over the top of the wrist pin on the downstroke. As long as engine speed remains below the design limit of the stock piston, most pistons will hold up fairly well to increased turbocharger boost pressures or even a brief shot of nitrous. But if the engine revs too high, the wrist pin eyelets can be literally pulled out of the piston.

Under Pressure
The pistons in a diesel engine must also withstand significantly higher compression pressures and operating temperatures than those in a gasoline engine. Because of this, the top piston ring runs hot. To reduce top ring pound out, most stock diesel pistons have a steel or iron insert for the top ring groove. This greatly improves the durability of the piston, and also allows the use of a keystone-shaped top ring to minimize ring sticking.

Because the pistons need a top ring groove insert for durability, the pistons must be cast rather than forged. Most use an alloy that contains 11-13% silicon so the pistons will have some ductility. To date, hypereutectic alloys with higher silicon levels have not been used for diesel pistons.

In heavy-duty high output engines, two-piece “articulated” pistons with steel crowns and aluminum skirts are often used for improved durability. The wrist pin holds the two pieces together, and allows the piston to handle higher loads than would be possible with a one-piece cast piston. Some engines also use a one-piece all-steel piston such as Mahle’s “Monotherm” piston or Federal Mogul’s “Monosteel” piston. The steel pistons are extremely durable and can handle the highest loads, but also tend to be heavy and expensive, costing up to three times as much as conventional cast aluminum pistons.

In recent years, diesel pistons with ceramic fiber reinforcement in the bowl rim have also been developed for high load applications. Such pistons were used in the Audi engine that won the Le Mans race. The cast-in fibers increase the load-bearing capacity at the bowl rim, and allow the pistons to withstand extremely high thermal loads without cracking.

Cooling, Coatings and Clearances
Another trick that’s done with many diesel pistons is to use oil jets to help cool the pistons. When an oil jet is directed at the underside of the piston, oil is deflected into the gallery so it circulates behind the rings to carry away heat. This technique lowers the temperature of the top ring up to 100° F or more to improve sealing, reduce blowby and emissions, and to extend the life of the piston and rings. In performance and marine diesel engines, oil cooling is even more important. On a stock Duramax diesel that squirts 1.2 gallons of oil per minute at each piston, the flow can be doubled by using larger jets and a higher capacity external gear- driven oil pump.

Cooling is improved even more by casting an oil cooling gallery into the top portion of the piston behind the upper ring land to dissipate heat. On some pistons, the cooling duct is created in the back of the top ring insert by welding on a steel plate.

Many stock diesel pistons come with anti-scuff coatings on the side skirts. Aftermarket performance pistons are also available with or without these side coatings, as well as oil-shedding undercoatings to improve cooling, and heat-reflective top coatings to help the pistons run cooler.

According to most of the piston suppliers we interviewed for this article, the jury is still out as to the benefits of insulating top coatings on diesel pistons. All agreed that the anti-scuff side coatings are a good idea for break-in and to protect the pistons and cylinders in the event the engine’s oil supply is disrupted for any reason. An insulating top coating on a diesel piston can slow heat transfer into the piston to reduce thermal expansion and stress on the piston and top ring. But whether the benefit this provides is worth the extra cost in a given application is open to debate.

If the stock cast pistons in a diesel engine are being replaced with stronger forged pistons, increased piston-to-cylinder clearance may be required. On a stock Duramax, for example, the factory recommends about 0.002” of clearance. With forged pistons, the clearance may have to be opened up to 0.006” or more. It all depends on the forging alloy and the design of the piston (how much taper is machined into the upper part of the piston).

Clearances can also depend on the cylinder’s location in the engine block. The rear cylinders on General Motors 6.5L turbocharged diesel engines from 1994 through 1998 typically run hotter than the rest of the engine’s cylinders because of the rear-mounted turbo and location of the exhaust manifolds. This can lead to cylinder cracking and even piston scuffing in the back cylinders. GM says engine builders should allow 0.0005” of additional piston-to-cylinder clearance on the two rear cylinders for this reason, and some say 0.001” of additional clearance provides an extra margin of safety.

Piston Upgrades
Several aftermarket piston manufacturers currently offer custom forged pistons for diesel engines. The forgings offer greater strength than the stock cast pistons they replace, and are a good upgrade for pulling and racing applications. Forged pistons and stronger rods usually become necessary in a light truck diesel engine once horsepower is boosted beyond 550-600 hp.

Forged pistons may contain almost no silicon up to 11.5% depending on the alloy. The forging process increases the density of the metal and significantly improves its strength (up to 40% or more over conventional cast pistons). Forging also increases cracking resistance, and may allow a piston to survive a close encounter with a valve without shattering (thus saving the engine). Forged pistons generally run 18-20% cooler than cast pistons, too, which is a plus in high heat or performance applications.

But forged pistons are not the best choice for a street engine because they lack the upper ring insert and cooling gallery that’s necessary for long-term durability. Hard anodizing the upper ring land helps, as does using a steel rectangular-shaped top ring. But these forged diesel pistons are intended primarily for “short run” racing, not your average daily driver pickup truck that may also be used for towing.

Engine enthusiast Gale Banks of Gale Banks Engineering (www.bankspower.com) says the two biggest issues with diesel pistons in a modified diesel engine are piston speed and temperature. He said stock Duramax pistons in the LLY and LB7 engines can usually handle up to 700 hp and engine speeds up to 5,000 rpm.

Beyond these limits a stronger piston is needed. The stock pistons in the LBZ and LMN Duramax engines are from a Japanese supplier, and are heavier with bushings in the pin bore. They can’t handle higher engine speeds, but can usually take up to 500-600 hp.

Banks said his company will be introducing a complete line of performance engine parts such as pistons, rods, stroker cranks and CNC ported cylinder heads for Cummins and Duramax engines in the near future. He said he will also be developing performance add-on products for the new 2008 VW diesels and possibly the new all-aluminum diesel engine that Honda will soon be introducing here in the U.S.

Though steel pistons have been used primarily in heavy-duty engines as well as some high-performance marine engines, it is possible that steel pistons may eventually find their way into light truck high-performance diesel engines, too. Except for some experimental pistons, steel pistons for light truck diesels are not yet available in the aftermarket.

Piston Evolution
As diesel engines continue to evolve, so do the piston designs that are used in subsequent generations of the same engine. On Ford 6.9L and 7.3L Powerstroke diesel engines, four different piston configurations have been used from 1992 to 2004. These include the 6.9L non-turbo piston, a 7.3L non-turbo piston, a 7.3L turbo piston with a significantly larger diameter wrist pin for added strength, and a 7.3L direct injection turbo piston with a recessed combustion chamber in the top of the piston. Another difference is that the non-turbo pistons in the 1994-’98.5 7.3L engines were mated to conventional forged steel rods. On the newer 1998.5-2004 7.3L engines, the small end of the connecting rods and the piston pin bosses are tapered to provide greater support for wrist pin. The rods are also powder metal with cracked caps.

One of the problems often seen on 1994-’97 7.3L Powerstroke engines is cylinder and ring wear due to dirt contamination. The stock Ford air cleaner didn’t seal well and could leak, allowing unfiltered air to be sucked into the engine. The OEM air filter also has a barely adequate filter capacity for this engine. Larger capacity aftermarket filter kits are available for these engines, and should be recommended if evidence of cylinder and ring wear due to dirt is found.

You May Also Like

Driveshaft Diagnostics

The big challenge with late-model vehicles is the diversity of driveshafts. 

Some customers say they can’t live without four wheel drive (4WD) or all wheel drive (AWD) for the winter. What 4WD and AWD vehicles can live without is a driveshaft going to the rear wheels. Most late-model driveshafts are not serviceable and do not have any lubrication points. But, this does not mean that they can’t wear, or even fail.

Nissan CVT Clutch Point Relearn Procedure

The Adaptive Shift Control delivers responsive and powerful acceleration.

Diagnostic Test Drive For Drivetrain

A driveshaft center bearing can fail due to the bearing and the rubber isolator.

Constant-Velocity Axle Options

Whether new or remanufactured, complete CV axle assemblies can throw you a curveball from time to time.

10 Timing Belt Tips

Here are the some key installation and service tips to make your next timing belt job just a little easier.

Other Posts

MEYLE Expands Electronics, Sensor Product Portfolio

The focus is on assistance systems and engine and transmission management, with more than 300 new part numbers.

FCS Introduces 42 New Numbers in May

Complete strut assemblies, shock absorbers, shock absorber assembly kits and suspension struts for popular VIO applications are included.

Philips Ultinon Drive 5000 LED Lightbar Line Expands

Lumileds has expanded the Philips Ultinon Drive 5000 series to include eight models.

DMA Adds New BrakeMaster Coverage

New coverage for Ford and Chevy includes popular pickup trucks and SUVs.