Turn to Delphi Technologies for Ball Joints

Turn to Delphi Technologies for Ball Joints

Sponsored by Delphi Technologies

We’ve got you covered.
Delphi Technologies has the ball joint SKUs you need, including the right hardware where needed for easy installation, for popular applications like the Chevy Silverado, Ford F-250 Super Duty, Dodge Ram 2500, Jeep Grand Cherokee, Honda Civic and more.

Intelligence in engineering.
We start with the OE design and conduct extensive dimensional and material analysis to develop our
part that will perform reliably on any vehicle. We’re passionate about our stringent technical standards—it’s in our DNA.

  • High-precision ball pin with a smooth finish not only offers smooth joint operation, but extra durability and superior angle dynamics as well.
  • Low-friction, high-performance thermoplastic bearing provides smooth movement of the joint and rotational torque to OE specifications for a long life.
  • Sealed, high-grade chloroprene rubber boot, improves boot durability with a superior material for higher resistance and performance.
  • Rust-beating cataphoretic coating on housing offers premium protection against corrosion from salt, dirt, and water.
  • High specification grease allows for longer intervals between maintenance.

Tested at every turn.
Our performance and durability tests subject the ball joint to the same forces it will experience over its
lifetime, so it’s ready for a long and reliable service life.

  • Angular stress testing: The ball-pin is rotated through its angular and rotational travel under load, measuring the force required to move it when the steering wheel turns.
  • Pull and push out test: Measures the force required for the ball to break away from the housing via pushing or pulling.
  • Climate testing: Ensures the ball joint will not seize up in extreme temperatures, and the rubber boot will not get brittle. A brittle boot can crack or tear, inviting contaminants in that can cause failure.

Ask for steering products from Delphi Technologies.
Delphi Technologies is a brand of BorgWarner Inc.

This article was sponsored by Delphi Technologies. For more information, please visit https://www.delphiautoparts.com/usa/en-US/product/ball-joints.

You May Also Like

In Praise of the Humble 12-Volt Battery 

The automotive industry is abuzz with news about battery advances. That is when it comes to those batteries used in electric vehicles. With traction batteries boasting 800 and even 900 volts, those advances are impressive, but also remarkable is how the 12-volt battery has evolved to support the power-draining safety and convenience features and fuel-

The automotive industry is abuzz with news about battery advances. That is when it comes to those batteries used in electric vehicles. With traction batteries boasting 800 and even 900 volts, those advances are impressive, but also remarkable is how the 12-volt battery has evolved to support the power-draining safety and convenience features and fuel- efficiency technologies on today's vehicles. 

Solid Axle Bearing Restoration

A solid axle might seem like antiquated technology. However, many vehicles still utilize solid or live axles because of their load-carrying capabilities. An axle is not a sealed unit. Inside are bearings, seals and fluids that must be serviced. Also, replacement parts are available from BCA. It’s not uncommon for a solid rear axle vehicle

THE CORNER CHECK AS A ROUTINE SERVICE

The safety of a vehicle relies on the condition of the suspension, steering and drivetrain, to ensure not only the tires remain in constant contact with the road, but that the proper alignment angles are maintained during the full range of suspension travel. This includes the shocks and struts, as well as control arms, steering

New Monobloc OE CV Axle Technology Greatly Reduces NVH

Today’s vehicle drivetrain systems are far more complex and powerful than ever before. So, you want to make sure you choose a replacement axle that matches the original OE design attributes to ensure proper performance and durability. Avoid installing an inferior axle based on price only, that may not perform properly or worse yet, fail

Advantages of a Pre-Assembled Knuckle Hub Assembly

Wheel bearings are a common repair, but they often present challenges during installation, taking additional time we don’t have to spare, and in some cases resulting in a comeback or quality that isn’t up to our standard. Generation 1 (press in) wheel bearings have always been the most difficult, and while Generation 3 (incorporated hub

Other Posts

Wheel Bearing Analysis

What creates endplay? What creates noise?

We Want Your Thoughts On Electronic Power Steering

Your opinion matters us and can be profitable for you too! Share your ideas with us.

Ball Joint Wear

As the wear increases, play increases inside the joint. 

Needs Come First When Choosing Aftermarket Or OE

It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.