Tech Tip: Shorter Oil Drain Interval will Provide the Best Defense Against Harmful Engine Deposits

Tech Tip: Shorter Oil Drain Interval will Provide the Best Defense Against Harmful Engine Deposits

There isn't a downside to more frequent oil changes. A shorter drain will provide the best defense against harmful engine deposits, better oil consumption control, improved fuel economy and lower wear on engine parts. More frequent oil changes also may help you discover a more serious engine problem, such as a coolant leak, before serious damage occurs ....

One of the great debates in automotive service is oil drain intervals. The correct oil change interval is the one prescribed by the engine manufacturer that can be found in a vehicle owner’s manual. Oil drain interval is determined by the engine type, drivetrain, vehicle type and expected use. Each OEM tests its own vehicles to determine the proper drain interval.

Some OEMs may have changed to longer drain recommendations as engines and motor oils are far more advanced over those produced even a few years ago. However, this is not always true, so you should check the owner’s manual for the specific drain interval for every vehicle. Understanding the type of driving a customer does with their vehicle is also beneficial. Generally speaking, most consumers drive a severe cycle of short-trip or stop-and-go type service, so using the severe service drain interval is recommended. With summer comes increased travel, which may include towing a boat or trailer. Those who use their car, SUV or light-duty truck for towing should also follow recommendations for severe service.

There isn’t a downside to more frequent oil changes. A shorter drain will provide the best defense against harmful engine deposits, better oil consumption control, improved fuel economy and lower wear on engine parts. More frequent oil changes also may help you discover a more serious engine problem, such as a coolant leak, before serious damage occurs.

Engine deposits and wear are slow, sure killers of performance and engine life. In most cases, by the time you are aware of an issue, the damage has been done and often cannot be reversed without an engine rebuild. Changing the oil in a vehicle at the appropriate drain interval is the easiest, most cost-effective insurance against lubricant-related engine damage.

Courtesy of Pennzoil.

For additional information on products offered by Pennzoil, visit www.pennzoil.com.

You May Also Like

Manual Transmission Failure Causes

One of the most common reasons behind why a manual transmission fails is lack of lubrication.

The most common reasons behind why a manual transmission fails are lack of lubrication, incorrect lubrication and improper or no clutch release.

COMPLEXITY OF LUBRICATION

Lubrication should be simple, but in the modern world NOTHING is simple. There was a time when virtually all stick transmissions ran on 90w gear oil. The synchronizer rings were brass or bronze, the cars and trucks shifted around 3,000 rpm and we had 3- and 4-speed transmissions. Ninety-weight did not like cold weather and generated multiple complaints to the manufacturer due to cold-shift problems. You needed two men and a boy to shift one of the units on a cold day until the fluid heated up.

Wheel Bearing Hub Damage Repair

Noise is a classic sign of a bad wheel bearing or wheel hub bearing. Determining why the damage happened may take some time.

Electric Vehicle Battery Service

Don’t be afraid to work on battery packs. However, you should be mindful of the potential damage high voltages can cause.

ADAS Suspension Alignments

Look at the “big picture” and really consider how the vehicle will operate if things aren’t done correctly.

Building The Perfect Future By Mentoring

Share your stories of how you have helped others reach their goals.

Other Posts

Electric Power Steering Diagnostics

Load management for steering systems.

GRI Receives US DOT Certification For Safety

GRI tires will now incorporate the DOT code emboss on its side walls.

Active Ride Control Diagnostics

The key to servicing these systems is proper information and understanding precisely how these systems operate.

Brake Pad Errors and Mismatches

In order to make the right selection, you must do your homework while still remaining skeptical.